FH Upper AustriaResearch & Development

Materials and Production Engineering Research Center Wels Campus

Publications

High-resolution X-ray computed tomography of inhomogeneous materials

C. Gusenbauer, M. Reiter, D. Salaberger, B. Plank, J. Kastner - High-resolution X-ray computed tomography of inhomogeneous materials - Proceedings of the 12th European Conference on Non-destructive Testing, Göteborg, Sweden, 2018, pp. 1-8
In this contribution, high-resolution X-ray computed tomography (XCT) results of various inhomogeneous samples including a poplar wood sample, a carbon fibre…   mehr
  • Proceedings
  • Measuring and Testing Technolgy
  • Materials and Production Engineering

Porous carbon templates from thermoset-based wood polymer composites as precursor for silicon carbide ceramics

C. Unterweger, B. Plank, S. Senck, M. Mihalic, C. Fürst - Porous carbon templates from thermoset-based wood polymer composites as precursor for silicon carbide ceramics - Carbon 2018, Madrid, Spanien, Spain, 2018, pp. 1-2
  • Proceedings
  • Materials and Production Engineering

Bio-based silicon carbide ceramics from extruded thermoset-based wood polymer composites

C. Fürst, B. Plank, S. Senck, M. Mihalic, C. Unterweger - Bio-based silicon carbide ceramics from extruded thermoset-based wood polymer composites - 18th European Conference on Composite Materials, Athens, Greece, 2018, pp. 1-7
  • Proceedings
  • Materials and Production Engineering

Water vapour diffusion resistance of larch (Larix decidua) bark insulation panels and application considerations based on numeric modelling

S. Senck, G. Kain, B. Lienbacher, M. Barbu, A. Petutschnigg - Water vapour diffusion resistance of larch (Larix decidua) bark insulation panels and application considerations based on numeric modelling - CONSTRUCTION AND BUILDING MATERIALS, 2018, pp. 308-316
  • Journal
  • Materials and Production Engineering

Investigation of new volumetric non-destructive techniques to characterise additive manufacturing parts

A. Obaton, M. Lê, V. Prezza, D. Marlot, P. Delvart, A. Huskic, S. Senck, E. Mahé, C. Cayron - Investigation of new volumetric non-destructive techniques to characterise additive manufacturing parts - Welding in the World, 2018, pp. 1049-1057
  • Journal
  • Materials and Production Engineering

Influence of the quenching and partitioning process on the isothermal bainitic transformation kinetics in a lean medium manganese steel

S. Kaar, R. Schneider, D. Krizan, C. Béal, C. Sommitsch - Influence of the quenching and partitioning process on the isothermal bainitic transformation kinetics in a lean medium manganese steel - Proc. of the 25th Congr. of IFHTSE, Xian, China, 2018, pp. 48
  • Proceedings
  • Materials and Production Engineering

ALTERNATIVE METHODS FOR DETERMINING MICROCLEANLINESS: A STUDY BASED ON HOT WORK TOOL STEELS

W. Schützenhöfer, C. Decker, B. Plank, E. Plesiutschnig - ALTERNATIVE METHODS FOR DETERMINING MICROCLEANLINESS: A STUDY BASED ON HOT WORK TOOL STEELS - IFM 2017 – 20th International Forgemasters Meeting 2017, Graz, Austria, 2017, pp. 10
This study focuses on the development and comparison of standard and alternative methods to evaluate the cleanliness of hot work tool steels used for dies on a…   mehr
  • Proceedings
  • Measuring and Testing Technolgy
  • Materials and Production Engineering

4D X-ray computed tomography by using conventional laboratory CTs: possibilities and limitations

B. Plank, D. Salaberger, G. Rao, A. Amirkhanov, J. Kastner - 4D X-ray computed tomography by using conventional laboratory CTs: possibilities and limitations - DGZfP- Annual Conference 2017, Koblenz, Germany, 2017, pp. 9
  • Proceedings
  • Measuring and Testing Technolgy
  • Materials and Production Engineering

Determination of a new empirical Ms-formula suitable for Medium-Mn-steels

R. Schneider, K. Steineder, A. Watanabe, M. Okumiya, D. Krizan, C. Sommitsch - Determination of a new empirical Ms-formula suitable for Medium-Mn-steels - Proceedings of the 24th IFHTSE CONGRESS 2017 - European Conference on Heat Treatment and Surface Engineering , Nice, France, 2017, pp. 1-9
  • Proceedings
  • Materials and Production Engineering

Influence of different cladding processes on microstructure and wear performance of tungsten carbide reinforced nickel-base alloys

S. Lang, R. Schneider, G. Posch, V. Jank, H. Scharner, W. Lutz, R. Kröschel - Influence of different cladding processes on microstructure and wear performance of tungsten carbide reinforced nickel-base alloys - Proceedings of the 24th IFHTSE CONGRESS 2017 - European Conference on Heat Treatment and Surface Engineering , Nice, France, 2017, pp. 1-9
  • Proceedings
  • Materials and Production Engineering

On the microstructural characteristics influencing the yielding behavior of ultra-fine grained medium-Mn steels

K. Steineder, D. Krizan, R. Schneider, C. Béal, C. Sommitsch - On the microstructural characteristics influencing the yielding behavior of ultra-fine grained medium-Mn steels - ACTA MATERIALIA, 2017, pp. 39-50
  • Journal
  • Materials and Production Engineering

Retained Austenite Stability in Al-alloyed Medium Manganese Steels

S. Kaar, D. Krizan, C. Commenda, L. Samek - Retained Austenite Stability in Al-alloyed Medium Manganese Steels - Proceedings ISDM 2017, Leoben, Austria, 2017
  • Proceedings
  • Materials and Production Engineering

Influence of an protective gas atmosphere on the electro-slag-remelting of the steel 50CrMo4

M. Molnar, R. Schneider, G. Klösch, C. Schüller - Influence of an protective gas atmosphere on the electro-slag-remelting of the steel 50CrMo4 - Conference Proceedings ISDM 2017, Leoben, Austria, 2017, pp. 16-24
  • Proceedings
  • Materials and Production Engineering

Microstructure dependent damage mechanisms in 3D using X-ray tomography

M. Jerabek, D. Salaberger, A. Amirkhanov, J. Kastner - Microstructure dependent damage mechanisms in 3D using X-ray tomography - Proceedings of the 21st International conference on Composite Materials, Xian, China, 2017, pp. 1-5
XCT was used to characterise the microstructure of short glass fibre reinforced polymers. Tools to determine local parameters like fibre orientation,…   mehr
  • Proceedings
  • Measuring and Testing Technolgy
  • Materials and Production Engineering

Influence of different welding processes on microstructure andwear performance of Ni-WC hardfacings

S. Lang, R. Schneider, G. Posch, V. Jank, H. Scharner, W. Lutz, R. Kröschel - Influence of different welding processes on microstructure andwear performance of Ni-WC hardfacings - Conference Proceedings ISDM 2017, Leoben, Austria, 2017, pp. 32-39
  • Proceedings
  • Materials and Production Engineering

Heat Treatment Conference 2017

R. Schneider - Heat Treatment Conference 2017, 2017
  • Book
  • Materials and Production Engineering

Heat treatment for the adjustment of properties in (deep drawing) steels for light weight autobodies

T. Hebesberger, D. Krizan, T. Kurz, F. Winkelhofer, K. Steineder, R. Schneider - Heat treatment for the adjustment of properties in (deep drawing) steels for light weight autobodies - Heat Treatment Conference 2017, Wien, Austria, 2017, pp. 3-9
  • Proceedings
  • Materials and Production Engineering

Effect of the slag composition and a protective atmosphere on chemical reactions and non-metallic inclusions during electro slag remelting of a hot-work tool steel

R. Schneider, M. Molnar, C. Schüller, S. Gelder, G. Reiter, C. Martinez - Effect of the slag composition and a protective atmosphere on chemical reactions and non-metallic inclusions during electro slag remelting of a hot-work tool steel - IFM 2017 – 20th International Forgemasters Meeting 2017, Graz, Austria, 2017, pp. 326-334
  • Proceedings
  • Materials and Production Engineering

Manufacturing of Tool Steels

M. Kubin, R. Schneider - Manufacturing of Tool Steels in Tool Steels (Editors: Rafael A. Mesquita), 2017, pp. 11-39
  • Book
  • Materials and Production Engineering

Investigation of new volumetric non-destructive techniques to characterise additive manufacturing parts

A. Huskic, S. Senck, A. Obaton, M. Lê, V. Prezza, D. Marlot, P. Delvart, E. Mahé, C. Cayron - Investigation of new volumetric non-destructive techniques to characterise additive manufacturing parts - WELDING, ADDITIVE MANUFACTURING AND ASSOCIATED NON-DESTRUCTIVE TESTING, Metz Arsenal, France, 2017
  • Proceedings
  • Measuring and Testing Technolgy
  • Materials and Production Engineering

The Effect of Fiber Concentration on Fiber Orientation in Injection Molded Film Gated Rectangular Plates

J. Jørgensen, E. Andreassen, D. Salaberger - The Effect of Fiber Concentration on Fiber Orientation in Injection Molded Film Gated Rectangular Plates - POLYMER COMPOSITES, 2017, pp. 15
  • Journal
  • Measuring and Testing Technolgy
  • Materials and Production Engineering

Page 2 from 10
FH Oberösterreich Logo