FH Upper AustriaResearch & Development

Materials and Production Engineering Research Center Wels Campus

Publications

Solids Conveying in Lab Scale Smooth Barrel Single Screw Extruders Regarding the Material Parameters` Dependence on Pressure, Temperature and Velocity

C. Kneidinger, S. Schuschnigg, G. Zitzenbacher, M. Längauer, J. Miethlinger - Solids Conveying in Lab Scale Smooth Barrel Single Screw Extruders Regarding the Material Parameters` Dependence on Pressure, Temperature and Velocity - Polymer Processing Society (PPS 32) 2016 Lyon, International Conference, Lyon, France, 2016, pp. 1
This work deals with the modeling of the solids conveying zone of a smooth barrel single screw Extruder (SSE) regarding two different shaped polypropylene…   mehr
  • Proceedings
  • Materials and Production Engineering

Sliding Wear of Polymer – Steel Pairings regarding Flame Retardant Equipped Glass Fibre Reinforced Polymers and (coated) tool steels

C. Kneidinger, M. Längauer, G. Zitzenbacher - Sliding Wear of Polymer – Steel Pairings regarding Flame Retardant Equipped Glass Fibre Reinforced Polymers and (coated) tool steels - PMI 2016 Proceedings of the International Conference on Polymers and Moulds Innovations, Gent, Austria, 2016
The processing of reinforced polymeric materials which are equipped with a flame retardant can cause wear at the plasticating screw, in the mold or in the die.…   mehr
  • Proceedings
  • Materials and Production Engineering

Computation of permeability of a non-crimp carbon textile reinforcement based on X-ray computed tomography images

I. Straumit, C. Hahn, E. Winterstein, B. Plank, S. Lomov, M. Wevers - Computation of permeability of a non-crimp carbon textile reinforcement based on X-ray computed tomography images - COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, Vol. 81, No. 1, 2016, pp. 289-295
The paper demonstrates the possibility of a correct (within the experimental scatter) calculation of a textile reinforcement permeability based on X-ray…   mehr
  • Journal
  • Measuring and Testing Technolgy
  • Materials and Production Engineering

Rapid Tooling for forming tools

A. Huskic, J. Giedenbacher, N. Wild, U. Pschebezin - Rapid Tooling for forming tools - Rapid Tech, Erfurt, Germany, 2016
  • Proceedings
  • Materials and Production Engineering

Timber-glass composites: calculation and sizing concept

W. Hochhauser, A. Fadai, W. Winter, M. Rinnhofer - Timber-glass composites: calculation and sizing concept - Proceedings of World Conference on Timber Engineering, Vienna, Austria, Austria, 2016
  • Proceedings
  • Materials and Production Engineering

EVALUATION OF ALTERNATIVE MICROCLEANLINESS METHODS

W. Schützenhöfer, C. Decker, B. Plank, E. Plesiutschnig - EVALUATION OF ALTERNATIVE MICROCLEANLINESS METHODS - Proceedings of 10th International TOOL Conference (TOOL 2016), Bratislava, Slovakia, 2016, pp. 10
This study focuses on the development and comparison of standard- and alternative methods to evaluate the Micro-cleanliness of tool steels on a microscopic…   mehr
  • Proceedings
  • Measuring and Testing Technolgy
  • Materials and Production Engineering

Additive processing of materials with a higher carbon content

A. Huskic - Additive processing of materials with a higher carbon content - THERMEC’ 2016, Graz, Austria, 2016
  • Proceedings
  • Materials and Production Engineering

Requirements and Trendsin modern Machining

W. Kwanka - Requirements and Trendsin modern Machining - Requirements and Trends in Machining, Stuttgart, Germany, 2016, pp. 10
  • Proceedings
  • Materials and Production Engineering

Effect of different welding processes on the microstructure of welded Ni-base-Tungsten-carbide wear protection coatings

S. Lang, R. Schneider, G. Posch, V. Jank, H. Scharner, W. Lutz, R. Kröschel - Effect of different welding processes on the microstructure of welded Ni-base-Tungsten-carbide wear protection coatings - Proceedings of Symposium "12 years MHT", Wels, Austria, 2016, pp. 16-17
  • Proceedings
  • Materials and Production Engineering

Comparative characterisation of mechanical properties of materials for rolls

A. Paar, R. Schneider, M. Han, T. Trickl, L. Elizondo, M. Brandner, C. Béal, C. Sommitsch - Comparative characterisation of mechanical properties of materials for rolls - Proceedings of Symposium "12 years MHT", Wels, Austria, 2016, pp. 14-15
  • Proceedings
  • Materials and Production Engineering

12 years Metallurgy and Heat Treatment at the Univ. of Appl. Sciences Upper Austria Campus Wels - a short story

R. Schneider - 12 years Metallurgy and Heat Treatment at the Univ. of Appl. Sciences Upper Austria Campus Wels - a short story - Proceedings of Symposium "12 years MHT", Wels, Austria, 2016, pp. 1-5
  • Proceedings
  • Materials and Production Engineering

Effect of different process parameters on the remelting behaviour of a hot-work tool steel during ESR

M. Molnar, R. Schneider, C. Schüller, S. Gelder, G. Reiter, C. Martinez - Effect of different process parameters on the remelting behaviour of a hot-work tool steel during ESR - Proceedings of Symposium "12 years MHT", Wels, Austria, 2016, pp. 8-9
  • Proceedings
  • Materials and Production Engineering

Alloy- and Heat treatment development of new Al-cast alloys for engine components - 10 years of successful coopeartion

B. Stauder, M. Rafetzeder, R. Schneider - Alloy- and Heat treatment development of new Al-cast alloys for engine components - 10 years of successful coopeartion - Proceedings of Symposium "12 years MHT", Wels, Austria, 2016, pp. 12-13
  • Proceedings
  • Materials and Production Engineering

Effects of different production routes on non-metallic inclusions in a case hardening steel

G. Klösch, C. Schüller, A. Paul, R. Schneider, G. Reiter, M. Zuber - Effects of different production routes on non-metallic inclusions in a case hardening steel - Proceedings of Symposium "12 years MHT", Wels, Austria, 2016, pp. 6-7
  • Proceedings
  • Materials and Production Engineering

Symposium " 12 years MHT" MEtallurgy and Heat Treatment

R. Schneider - Symposium " 12 years MHT" MEtallurgy and Heat Treatment, 2016, pp. 1-27
  • Book
  • Materials and Production Engineering

Effect of diferent Process Parameters on the Electro-Slag-Remelting behaviour of a Hot-work Tool steel

R. Schneider, M. Molnar, C. Schüller, S. Gelder, G. Reiter, C. Martinez - Effect of diferent Process Parameters on the Electro-Slag-Remelting behaviour of a Hot-work Tool steel - Proceedings of 10th International TOOL Conference (TOOL 2016), Bratislava, Slovakia, 2016, pp. 303-310
  • Proceedings
  • Materials and Production Engineering

On the micro-scale damage behavior of a 0.1C6Mn Medium-Mn steel

K. Steineder, D. Krizan, R. Schneider, C. Béal, C. Sommitsch - On the micro-scale damage behavior of a 0.1C6Mn Medium-Mn steel - Proceedings 1st International Conference on Automobile Steel & 3rd International Conference on High Manganese Steels, Chengdu, China, 2016, pp. 415-419
  • Proceedings
  • Materials and Production Engineering

In-Situ Observation of Bubble Formation in Neat Resin during the Curing Process by Means of X-Ray Computed Tomography

B. Plank, R. Helmus, M. Gschwandtner, R. Hinterhölzl, J. Kastner - In-Situ Observation of Bubble Formation in Neat Resin during the Curing Process by Means of X-Ray Computed Tomography - 19th World Conference on Non-Destructive Testing, WCNDT 2016 , München, Germany, 2016, pp. 1-8
Because of their outstanding specific strength carbon fibre-reinforced polymers (CFRP) are the favourite material for many lightweight applications, especially…   mehr
  • Proceedings
  • Measuring and Testing Technolgy
  • Materials and Production Engineering

Hardness-toughness relationship of a boron alloyed quench and tempering steel after different heat treatment cycles

R. Schneider, K. Steineder, Y. Tohima, M. Okumiya - Hardness-toughness relationship of a boron alloyed quench and tempering steel after different heat treatment cycles - Proceedings of 23nd IFHTSE Congress, Savannah, United States of America, 2016
  • Proceedings
  • Materials and Production Engineering

Influence of the initial microstructure and the annealing temperature on the retained austenite stability of Medium-Mn steels

K. Steineder, R. Schneider, D. Krizan, C. Béal, C. Sommitsch - Influence of the initial microstructure and the annealing temperature on the retained austenite stability of Medium-Mn steels - Proceedings of Symposium "12 years MHT", Wels, Austria, 2016, pp. 10-11
  • Proceedings
  • Materials and Production Engineering

The effects of intercritical annealing temperature and initial microstructure on the stability of retained austenite in a 0.1C-6Mn steel

K. Steineder, D. Krizan, R. Schneider, C. Béal, C. Sommitsch - The effects of intercritical annealing temperature and initial microstructure on the stability of retained austenite in a 0.1C-6Mn steel - Advanced Materials Research, 2016, pp. 1847-1852
  • Journal
  • Materials and Production Engineering

Page 3 from 10
FH Oberösterreich Logo