FH Upper AustriaResearch & Development

Materials and Production Engineering Research Center Wels Campus

Publications

Proceedings of the 30th ASMET Heat Treatment Conference

R. Schneider - Proceedings of the 30th ASMET Heat Treatment Conference, 2013, pp. 1-98
  • Book
  • Materials and Production Engineering

Study of the heat absorption in the thermoforming process for transparent and filled polystyrene

J. F. Pühringer, G. Zitzenbacher, C. Spreitzer - Study of the heat absorption in the thermoforming process for transparent and filled polystyrene - INTERNATIONAL POLYMER PROCESSING, Vol. 28, No. 1, 2013, pp. 14-23
  • Journal
  • Measuring and Testing Technolgy
  • Materials and Production Engineering

CCD camera-based analysis of thin film growth in industrial PACVD processes

G. Zauner, T. Schulte, C. Forsich, D. Heim - CCD camera-based analysis of thin film growth in industrial PACVD processes - SPIE Optical Metrology 2013, Munich, Germany, 2013
  • Proceedings
  • Measuring and Testing Technolgy
  • Materials and Production Engineering

Influence of short-cycle heat treatment conditions on the hardness-toughness-relationship of the steels 51CrV4, ~74NiCr2 and 100Cr6

K. Steineder, R. Schneider - Influence of short-cycle heat treatment conditions on the hardness-toughness-relationship of the steels 51CrV4, ~74NiCr2 and 100Cr6 - HTM J. Heat Treatment Material, Vol. 68, No. 2, 2013, pp. 77-84
The paper covers the effect of different heat treatment conditions, with a focus on short-cycle heat treatment, on the mechanical properties hardness and…   mehr
  • Journal
  • Materials and Production Engineering

Influence of selected electrical parameters on the ESR Process.

A. Paar, R. Schneider, G. Reiter, P. Zeller, P. Würzinger, M. Wöls, S. Paul - Influence of selected electrical parameters on the ESR Process. - Proceedings of the 19th International Student's Day of Metallurgy, Freiberg, Germany, 2012
  • Proceedings
  • Materials and Production Engineering

Examination of the toughness-hardness-relation of 51CrV4 using different short-cycle heat treatments

K. Steineder, R. Schneider - Examination of the toughness-hardness-relation of 51CrV4 using different short-cycle heat treatments - Proceedings of the 19th International Student's Day of Metallurgy, Freiberg, Germany, 2012
  • Proceedings
  • Materials and Production Engineering

lubricate in deep drawing

A. Huskic, N. Wild - lubricate in deep drawing - MachineryMarket, Vol. 5, No. 3, 2012, pp. 16-17
  • Journal
  • Materials and Production Engineering

SLS for forming tools

A. Huskic, J. Giedenbacher, N. Wild, U. Pschebezin - SLS for forming tools - RTejournal, Vol. 2012, No. 9, 2012
  • Journal
  • Materials and Production Engineering

From the granules to injection-molded component: Influence of the injection moulding process chain on Fiber length distribution determined by X-ray computed tomography.

B. Plank - From the granules to injection-molded component: Influence of the injection moulding process chain on Fiber length distribution determined by X-ray computed tomography. - Master/Diploma Thesis, FH OÖ Studienbetriebs GmbH, Austria, 2012, pp. 150
  • Report
  • Measuring and Testing Technolgy
  • Materials and Production Engineering

Characterization of the wear behavior during cutting of a HCT980C steel

B. Eichinger, R. Schneider, G. Rabler, C. Walch - Characterization of the wear behavior during cutting of a HCT980C steel - Proceedings of the 19th International Student's Day of Metallurgy, Freiberg, Germany, 2012, pp. 197-203
  • Proceedings
  • Materials and Production Engineering

Comparing investigation on hardness-toughness-relationship of 51CrV4, ~74NiCr2 and 100Cr6 due to different short-cycle heat treaments

K. Steineder, R. Schneider - Comparing investigation on hardness-toughness-relationship of 51CrV4, ~74NiCr2 and 100Cr6 due to different short-cycle heat treaments - HK 2012 - 68. HärtereiKongress, Proceedings, Wiesbaden, Germany, 2012
  • Proceedings
  • Materials and Production Engineering

Investigation of the wear behaviour of different tool steels and heat treatment conditions for the cutting of a HCT980C advanced high strength steel

R. Schneider, B. Eichinger, G. Rabler, C. Walch - Investigation of the wear behaviour of different tool steels and heat treatment conditions for the cutting of a HCT980C advanced high strength steel - Proc. of the 9th Int. Tooling Conference „Developing the World of Tooling”, Leoben, Austria, 2012, pp. 425-433
  • Proceedings
  • Materials and Production Engineering

"The Faster the Better"-Wärmebehandlung von Warmarbeitsstählen

V. Strobl, N. Dickinger, R. Schneider - "The Faster the Better"-Wärmebehandlung von Warmarbeitsstählen - HTM J. Heat Treatment Material, Vol. 67, No. 2, 2012, pp. 91-94
  • Journal
  • Materials and Production Engineering

Full-field optical coherence microscopy with a sub-nanosecond supercontinuum light source for material research

B. Heise, S. Schausberger, S. Häuser, B. Plank, D. Salaberger, E. Leiss-Holzinger, D. Stifter - Full-field optical coherence microscopy with a sub-nanosecond supercontinuum light source for material research - OPTICAL FIBER TECHNOLOGY, Vol. 18, No. 5, 2012, pp. 403-410
Full-field optical coherence microscopy performed with a supercontinuum light source based on a Q-switched micro-chip laser pumped photonic crystal fiber is…   mehr
  • Journal
  • Measuring and Testing Technolgy
  • Materials and Production Engineering

Deposition of thick a-C:H:Si coatings for tribological applications

D. Heim, C. Forsich, T. Müller - Deposition of thick a-C:H:Si coatings for tribological applications - 55th Annual Technical Conference Proceedings, Santa Clara, United States of America, 2012
  • Proceedings
  • Materials and Production Engineering

Determination of optimization potentials of an extrusion slit die used for production of polymer films by CFD-simulation

C. Stallinger, J. F. Pühringer, C. Hochenauer, G. Zitzenbacher, M. Längauer, G. Metzbauer, C. Maticka - Determination of optimization potentials of an extrusion slit die used for production of polymer films by CFD-simulation - Proceedings FFH 2012, Graz, Austria, 2012, pp. 83-87
Die Auslegung und Konstruktion von Extrusionswerkzeugen erfolgte früher aufgrund der Erfahrungen des Konstrukteurs und der Techniker und durch Modifikation…   mehr
  • Proceedings
  • Production and Operations Management
  • Materials and Production Engineering

FRICTIONAL BEHAVIOR OF BIOPLASTICS AT SCREW SURFACES UNDER PROCESSING CONDITIONS

C. Kneidinger, K. Liu, G. Zitzenbacher, K. Steinbrecher - FRICTIONAL BEHAVIOR OF BIOPLASTICS AT SCREW SURFACES UNDER PROCESSING CONDITIONS - Polymer Processing Society (PPS) Americas Conference, Niagara Falls, Ontario, Canada, 2012
Bioplastics and Wood Plastic Composites (WPC) are quite new Materials. The optimization of processing is a critical factor for the products´ functional…   mehr
  • Proceedings
  • Materials and Production Engineering

2D In-situ Investigations of Polymer Foams by Means of Radiography and 3D Structural Analysis by means of X-ray Computed Tomography

H. Scharleitner - 2D In-situ Investigations of Polymer Foams by Means of Radiography and 3D Structural Analysis by means of X-ray Computed Tomography - Master/Diploma Thesis, FH OÖ Forschungs & Entwicklungs GmbH, Austria, 2012, pp. 117
This work is concerned with creating a setup for ink application onto foam materials of two stamp systems and their sub systems and the investigation of their…   mehr
  • Report
  • Measuring and Testing Technolgy
  • Materials and Production Engineering

Phase transformation of austenite during isothermal holding of a high-performance high-manganese steel

R. Mesquita, R. Schneider, K. Steineder, E. Arenholz, L. Samek - Phase transformation of austenite during isothermal holding of a high-performance high-manganese steel - Proceedings of 4th International Conference on Thermomechanical Processing of Steels, Sheffield, United Kingdom of Great Britain and Northern Ireland, 2012
A new composition of high-manganese steel with high Mn and low Si steel was studied, evaluating the austenite stability after different heat treating…   mehr
  • Proceedings
  • Materials and Production Engineering

Determination of the relationship between hardness and toughness for short heat treatment cycles

R. Schneider, T. Schlagradl, C. Schüller, R. Grunwald - Determination of the relationship between hardness and toughness for short heat treatment cycles - HTM J. Heat Treatment Material, Vol. 67, No. 1, 2012, pp. 31-38
  • Journal
  • Materials and Production Engineering

Examples of the Use for New Analytical Testing Techniques of High-Performance Steel Grades

R. Werl, W. Winkler, A. Pissenberger, M. Egger, S. Aigner, J. Pühringer, S. Michelic, C. Bernhard, W. Schützenhöfer, R. Schneider, C. Schüller - Examples of the Use for New Analytical Testing Techniques of High-Performance Steel Grades - Journal of Mining, Metallurgical, Materials, Geotechnical, and Plant Engineering, Vol. 157, No. 5, 2012, pp. 194-203
  • Journal
  • Materials and Production Engineering

Page 7 from 10
FH Oberösterreich Logo