FH Upper AustriaResearch & Development

Materials and Production Engineering Research Center Wels Campus

Publications

Analysis of ink distribution in polymer foams by X-ray computed tomography

D. Salaberger, H. Scharleitner, J. Kastner - Analysis of ink distribution in polymer foams by X-ray computed tomography - DACH NDT Annual Meeting 2012, Graz, Austria, 2012
  • Proceedings
  • Materials and Production Engineering

Evaluation of CT data from Fibre Reinforced Polymers to determine fibre length distribution

D. Salaberger, K. Arunachalam Kannappan, J. Kastner, J. Reussner, T. Auinger - Evaluation of CT data from Fibre Reinforced Polymers to determine fibre length distribution - INTERNATIONAL POLYMER PROCESSING, Vol. 26, No. 3, 2011, pp. 283-291
  • Journal
  • Measuring and Testing Technolgy
  • Materials and Production Engineering

Investigation and characterization of zinc abrasion for stamping body panels

A. Huskic, M. Kendel - Investigation and characterization of zinc abrasion for stamping body panels - Proceedings of the fifth Research Forum of the Austrian University of Applied Sciences, Wien (Favoriten), Austria, 2011
  • Proceedings
  • Materials and Production Engineering

Duplex a-C:H:Si coatings of inner surfaces by means of DC-PACVD

C. Forsich, D. Heim, T. Müller, A. Gebeshuber - Duplex a-C:H:Si coatings of inner surfaces by means of DC-PACVD - 54th Annual Technical Conference Proceedings54th Annual Society of Vacuum Coaters Technical Conference, Chicago, United States of America, 2011
  • Proceedings
  • Materials and Production Engineering

Simulation aided study for optimising device parameters of an industrial X-ray computed tomography system for non-destructive testing and materials characterisation

M. Reiter, B. Harrer, D. Salaberger, C. Heinzl, C. Gusenbauer, C. Kuhn, J. Kastner - Simulation aided study for optimising device parameters of an industrial X-ray computed tomography system for non-destructive testing and materials characterisation - International Symposium on Digital Industrial Radiology and Computed Tomography 2011, Berlin, Germany, 2011
  • Proceedings
  • Measuring and Testing Technolgy
  • Materials and Production Engineering

Non-destructive characterization of heterogeneous materials in sub-micron range using Cone-beam X-ray computed tomography

B. Plank, B. Harrer, D. Salaberger, J. Kastner - Non-destructive characterization of heterogeneous materials in sub-micron range using Cone-beam X-ray computed tomography - Proceedings of the fifth Research Forum of the Austrian University of Applied Sciences, Wien (Favoriten), Austria, 2011, pp. 232-235
  • Proceedings
  • Measuring and Testing Technolgy
  • Materials and Production Engineering

Study on the Correlation of the elongation modulus at elevated temperatures and the temperature dependent flexural modulus from DMA measurements of a PP homopolymer

J. F. Pühringer, C. Maier, G. Zitzenbacher - Study on the Correlation of the elongation modulus at elevated temperatures and the temperature dependent flexural modulus from DMA measurements of a PP homopolymer - Advances in Polymer Science and Technology Two, Linz, Austria, 2011, pp. 62
The thermoforming process can be split into the following steps: heating of the semi-finished product (film or plate), prestretching, forming, cooling and…   mehr
  • Proceedings
  • Materials and Production Engineering

Development of a Toughness Testing Method for the Effect of Short Heat Treatment Cycles on High-strength Filler Materials Using Subsized Charpy V-Specimens

T. Schlagradl, R. Schneider, G. Posch, R. Schnitzer - Development of a Toughness Testing Method for the Effect of Short Heat Treatment Cycles on High-strength Filler Materials Using Subsized Charpy V-Specimens - Journal of Mining, Metallurgical, Materials, Geotechnical, and Plant Engineering, Vol. 156, No. 3, 2011, pp. 93-98
  • Journal
  • Materials and Production Engineering

Development of a Toughness Testing Method for the Effect of Short Heat Treatment Cycles on High-strength Filler Materials Using Subsized Charpy V-Specimens

T. Schlagradl, R. Schneider, G. Posch, R. Schnitzer - Development of a Toughness Testing Method for the Effect of Short Heat Treatment Cycles on High-strength Filler Materials Using Subsized Charpy V-Specimens - 18. Internatinal Student´s Day of Metallurgy, Leoben, Austria, 2011, pp. 71-79
  • Proceedings
  • Materials and Production Engineering

Investigation of the suitability of metal-ceramic powder mixtures for generative ​​tools

A. Huskic, C. Voit, Z. Simicevic - Investigation of the suitability of metal-ceramic powder mixtures for generative ​​tools - RTejournal, Vol. 8, No. 14, 2011
Additive Manufacturing of forming tools is attracting more and more attention today. As selective laser sintered tools offer a high level of design freedom,…   mehr
  • Journal
  • Materials and Production Engineering

Comparison of Austenitic High-Mn-Steels with Different Mn- and C-Contents Regarding their Processing Properties

S. Hofer, M. Hartl, G. Schestak, R. Schneider, E. Arenholz, L. Samek - Comparison of Austenitic High-Mn-Steels with Different Mn- and C-Contents Regarding their Processing Properties - Journal of Mining, Metallurgical, Materials, Geotechnical, and Plant Engineering, Vol. 156, No. 3, 2011, pp. 99-104
  • Journal
  • Materials and Production Engineering

Performance of Different Tool Steels for the Cutting of an CP1000 Advanced High Strength Steel

J. Schneckenleitner, R. Schneider, G. Rabler, C. Walch, E. Heinl, J. Mauser, A. Hechtl - Performance of Different Tool Steels for the Cutting of an CP1000 Advanced High Strength Steel - Journal of Mining, Metallurgical, Materials, Geotechnical, and Plant Engineering, Vol. 156, No. 3, 2011, pp. 105-111
  • Journal
  • Materials and Production Engineering

Installation and Startup of an Experimental ESR Plant

R. Schneider, A. Paar, P. Zeller, G. Reiter, W. Schützenhöfer, P. Würzinger - Installation and Startup of an Experimental ESR Plant - Journal of Mining, Metallurgical, Materials, Geotechnical, and Plant Engineering, Vol. 156, No. 3, 2011
  • Journal
  • Materials and Production Engineering

Comparison of Austenitic High-Mn-Steels with Different Mn- and C-Contents Regarding their Processing Properties

S. Hofer, M. Hartl, G. Schestak, R. Schneider, L. Samek, E. Arenholz - Comparison of Austenitic High-Mn-Steels with Different Mn- and C-Contents Regarding their Processing Properties - 18. Internatinal Student´s Day of Metallurgy, Leoben, Austria, 2011, pp. 21-30
  • Proceedings
  • Materials and Production Engineering

A new rheological measuring die to determine the influence of the flow channel surface on wall slippage

G. Metzbauer, J. F. Pühringer, G. Zitzenbacher, P. Reven, C. Kneidinger, D. Heim - A new rheological measuring die to determine the influence of the flow channel surface on wall slippage - Advances in Polymer Science and Technology Two, Linz, Austria, 2011, pp. 61
Rheological instabilities like stick slip or shark skin as well as wall slippage in thermoplastic melt flow affect significantly the surface quality of…   mehr
  • Proceedings
  • Materials and Production Engineering

Nitriding of powder-metallurgical produced high-alloyed plastic mould steels

T. Fuchs, G. Pöckl, J. Mittmannsgruber, R. Schneider - Nitriding of powder-metallurgical produced high-alloyed plastic mould steels - HTM J. Heat Treatment Material, Vol. 66, No. 2, 2011, pp. 87-93
  • Journal
  • Materials and Production Engineering

Advances in tool steels and their heat treatment – Part 2: Hot Work Tool Steels and Plastic Mould Steels

R. Schneider, R. Mesquita - Advances in tool steels and their heat treatment – Part 2: Hot Work Tool Steels and Plastic Mould Steels - International Heat Treatment and Surface Engineering, Vol. 5, No. 3, 2011, pp. 94-100
  • Journal
  • Materials and Production Engineering

High resolution cone beam X-ray computed tomography of 3D-microstructures of cast Al-alloys

J. Kastner, B. Harrer, H. Degischer - High resolution cone beam X-ray computed tomography of 3D-microstructures of cast Al-alloys - MATERIALS CHARACTERIZATION, Vol. 62, No. 1, 2011, pp. 99-107
  • Journal
  • Materials and Production Engineering

X-ray Microtomography: characterisation of structures and defect analysis

B. Harrer, J. Kastner - X-ray Microtomography: characterisation of structures and defect analysis in Fabrication and Characterization in the Micro-Nano Range - Springer Vieweg, 2011, pp. 119-150
  • Book
  • Measuring and Testing Technolgy
  • Materials and Production Engineering

Radiation absorption of Polystyrene semi-finished products during the thermoforming process

J. F. Pühringer, G. Zitzenbacher, C. Spreitzer - Radiation absorption of Polystyrene semi-finished products during the thermoforming process - Proceedings of the fifth Research Forum of the Austrian University of Applied Sciences, Wien (Favoriten), Austria, 2011, pp. 300-301
  • Proceedings
  • Materials and Production Engineering

Untersuchung des Zinkabriebs beim Tiefziehen von verzinkten Feinblechen

A. Huskic, M. Kendel - Untersuchung des Zinkabriebs beim Tiefziehen von verzinkten Feinblechen - 29. Colloquium on metal forming , Planneralm, Austria, 2010, pp. 97-102
  • Proceedings
  • Materials and Production Engineering

Page 8 from 10
FH Oberösterreich Logo