FH Upper AustriaResearch & Development

Measuring and Testing Technology Research Center Wels Campus

Publications

Dynamic Volume Lines: Visual Comparison of 3D Volumes through Space-filling Curves

J. Weissenböck, B. Fröhler, E. Gröller, J. Kastner, C. Heinzl - Dynamic Volume Lines: Visual Comparison of 3D Volumes through Space-filling Curves - IEEE Transactions on Visualization and Computer Graphics (TVCG), Vol. 25, No. 1, 2019, pp. 1040-1049
The comparison of many members of an ensemble is difficult, tedious, and error-prone, which is aggravated by often just subtle differences. In this paper, we…   mehr
  • Journal
  • Measuring and Testing Technolgy

Estimation of Material Parameters from Pulse Phase Thermography Data

B. Stotter, K. Gresslehner, G. Mayr, G. Hendorfer, J. Sekelja - Estimation of Material Parameters from Pulse Phase Thermography Data - AIP Conference Proceedings, Baltimore, Spain, 2019
  • Proceedings
  • Measuring and Testing Technolgy

Multi-modal characterization of CFRP samples produced by resin infusion using phase contrast and dark-field imaging

S. Senck, J. Šleichrt, B. Plank, J. Glinz, J. Kastner, S. Ayalur-Karunakaran , D. Kytýř - Multi-modal characterization of CFRP samples produced by resin infusion using phase contrast and dark-field imaging - International Conference on Tomography of Materials & Structures, Cairns, Australia, 2019, pp. 1-2
In this work we present a multi-modal approach to characterize macro- and microstructural features in carbon fiber reinforced polymer samples produced by…   mehr
  • Proceedings
  • Measuring and Testing Technolgy

Characterization of the microstructure of injection moulded fibre reinforced thermoplastics using high resolution X-ray computed tomography

J. Maurer, D. Salaberger, M. Jerabek, J. Kastner - Characterization of the microstructure of injection moulded fibre reinforced thermoplastics using high resolution X-ray computed tomography - DACH-Jahrestagung 2019, Friedrichshafen, Germany, 2019
  • Proceedings
  • Measuring and Testing Technolgy

Damage characterisation of short glass fibre reinforced polyamide with different fibre content by an interrupted in-situ X-Ray computed tomography test

J. Maurer, C. Hannesschläger, B. Plank, J. Kastner - Damage characterisation of short glass fibre reinforced polyamide with different fibre content by an interrupted in-situ X-Ray computed tomography test - Digital Industrial Radiology and Computed Tomography, Fürth, Germany, 2019
  • Proceedings
  • Measuring and Testing Technolgy

An Interactive Visual Comparison Tool for 3D Volume Datasets represented by Nonlinearly Scaled 1D Line Plots through Space-filling Curves

J. Weissenböck, B. Fröhler, E. Gröller, J. Sanctorum, J. De Beenhouwer, J. Sijbers, S. Ayalur Karunakaran, H. Höller, J. Kastner, C. Heinzl - An Interactive Visual Comparison Tool for 3D Volume Datasets represented by Nonlinearly Scaled 1D Line Plots through Space-filling Curves - 9th International Conference on Industrial Computed Tomography (iCT) 2019, Padova, Italy, 2019, pp. 9
The comparison of many 3D volumes to find subtle differences is tedious, time-consuming and error-prone. Previously we presented Dynamic Volume Lines [1], a…   mehr
  • Proceedings
  • Measuring and Testing Technolgy

Tools for the Analysis of Datasets from X-Ray Computed Tomography based on Talbot-Lau Grating Interferometry

B. Fröhler, L. da Cunha Melo, J. Weissenböck, J. Kastner, T. Möller, H. Hege, E. Gröller, J. Sanctorum, J. De Beenhouwer, J. Sijbers, C. Heinzl - Tools for the Analysis of Datasets from X-Ray Computed Tomography based on Talbot-Lau Grating Interferometry - 9th International Conference on Industrial Computed Tomography (iCT) 2019, Padova, Italy, 2019, pp. 8
  • Proceedings
  • Measuring and Testing Technolgy

open_iA: A tool for processing and visual analysis ofindustrial computed tomography datasets

B. Fröhler, J. Weissenböck, M. Schiwarth, J. Kastner, C. Heinzl - open_iA: A tool for processing and visual analysis ofindustrial computed tomography datasets - Journal of Open Source Software, Vol. 4, No. 35, 2019, pp. 3
open_iA is a platform for visual analysis and processing of volumetric datasets. Themain driver behind its development is to provide a common framework for…   mehr
  • Journal
  • Measuring and Testing Technolgy

A Visual Tool for the Analysis of Algorithms for Tomographic Fiber Reconstruction in Materials Science

B. Fröhler, T. Elberfeld, T. Möller, H. Hege, J. Weissenböck, J. De Beenhouwer, J. Sijbers, J. Kastner, C. Heinzl - A Visual Tool for the Analysis of Algorithms for Tomographic Fiber Reconstruction in Materials Science - COMPUTER GRAPHICS FORUM, Vol. 38, No. 3, 2019, pp. 273-283
We present visual analysis methods for the evaluation of tomographic fiber reconstruction algorithms by means of analysis, visual debugging and comparison of…   mehr
  • Journal
  • Measuring and Testing Technolgy

Gleisgeometriemesssystem der neuen Generation

G. Zauner, F. Auer, M. Bürger, C. Gieber - Gleisgeometriemesssystem der neuen Generation - Der Eisenbahningenieur, Vol. 2019, No. 2, 2019, pp. 36-39
  • Journal
  • Measuring and Testing Technolgy

Finite element modeling of nano porous sintered silver material using computed tomography images

M. Bahman, M. Awang , P. Bokam, B. Plank, C. Heinzl, K. Siow - Finite element modeling of nano porous sintered silver material using computed tomography images - MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, Vol. 50, No. 5, 2019, pp. 533-538
Limitations in the packaging industry require improvements in lead‐based microelectronics, because regulations restricting hazardous substances have ended the…   mehr
  • Journal
  • Measuring and Testing Technolgy

Characterization of fiber lay-up and defects in CFRP using Talbot-Lau grating interferometry

S. Senck, M. Scheerer, B. Plank, C. Hannesschläger, J. Kastner - Characterization of fiber lay-up and defects in CFRP using Talbot-Lau grating interferometry - 9th International Conference on Industrial Computed Tomography (iCT) 2019, Padova, Italy, 2019, pp. 1-7
  • Proceedings
  • Measuring and Testing Technolgy

Three-dimensional thermographic reconstruction of embedded heat sources by means of virtual waves

G. Stockner, G. Mayr, P. Burgholzer, G. Hendorfer - Three-dimensional thermographic reconstruction of embedded heat sources by means of virtual waves - QIRT 2018 (Berlin), Berlin, Germany, Germany, 2018
  • Proceedings
  • Measuring and Testing Technolgy

Image reconstruction on pulsed thermography data using the virtual wave concept

G. Stockner, G. Mayr, P. Burgholzer, G. Hendorfer - Image reconstruction on pulsed thermography data using the virtual wave concept - INTERNATIONAL SCHOOL OF QUANTUM ELECTRONICS 62nd Course (2018), Erice, Erice, Italy, 2018
  • Proceedings
  • Measuring and Testing Technolgy

Visual analysis of void and reinforcement characteristics in X-ray computed tomography dataset series of fiber-reinforced polymers

M. Schiwarth, J. Weissenböck, B. Plank, B. Fröhler, C. Heinzl, J. Kastner - Visual analysis of void and reinforcement characteristics in X-ray computed tomography dataset series of fiber-reinforced polymers - Proceedings of the 13th International Conference on Textile Composites, Mailand, Italy, 2018, pp. 12
Fiber-reinforced polymers (FRPs) are of great importance in various industries because of their superior properties as compared to conventional materials,…   mehr
  • Proceedings
  • Measuring and Testing Technolgy

open_iA: A Framework for Analyzing Industrial Computed Tomography Data

B. Fröhler, C. Heinzl, J. Weissenböck, A. Amirkhanov, M. Arikan, J. Kastner - open_iA: A Framework for Analyzing Industrial Computed Tomography Data - Proceedings of the 12th European Conference on Non-destructive Testing, Göteborg, Sweden, 2018
The open source software open_iA is presented, which facilitates non-destructive testing tasks such as feature extraction, quantification and visualization…   mehr
  • Proceedings
  • Measuring and Testing Technolgy

Exploring Uncertainty in Image Segmentation Ensembles

B. Fröhler, T. Möller, J. Weissenböck, H. Hege, J. Kastner, C. Heinzl - Exploring Uncertainty in Image Segmentation Ensembles - Proceedings of the 20th EG/VGTC Conference on Visualization, Brünn, Czech Republic, 2018
Finding the most accurate image segmentation involves analyzing results from different algorithms or parameterizations. In this work, we identify different…   mehr
  • Proceedings
  • Measuring and Testing Technolgy

Smart Tamping - Fields of Application of the Tournout Tamping Assistance System

G. Zauner, M. Bürger, F. Auer, G. Jodlbauer, D. Buchbauer, A. Theiß - Smart Tamping - Fields of Application of the Tournout Tamping Assistance System - ZEVrail, Vol. 142, No. 1, 2018
  • Journal
  • Measuring and Testing Technolgy
  • Automated Control Engineering and Simulation

X-ray computed tomography for applications in industry and materials science

J. Kastner, C. Heinzl, J. Glinz - X-ray computed tomography for applications in industry and materials science - Proceedings of the 57th Annual British Conference on Non-Destructive Testing, Nottingham, UK, United Kingdom of Great Britain and Northern Ireland, 2018, pp. 1-12
Over the past years, many novel X-ray imaging techniques, scanning protocols, data processing and visualization methods have been developed. Industrial X-ray…   mehr
  • Proceedings
  • Measuring and Testing Technolgy

Single fibre characterization of heavily curved polymer fibres using X-ray computed tomography

D. Salaberger, T. Lummerstorfer, M. Jerabek, J. Kastner - Single fibre characterization of heavily curved polymer fibres using X-ray computed tomography - Proceedings of the 18th European Conference on Composite Materials, Athens, Greece, 2018, pp. 1-6
The material system polypropylene filled with long polyethylene terephthalate fibres was investigated by CT analyses. Micro-structural features as length,…   mehr
  • Proceedings
  • Measuring and Testing Technolgy
  • Materials and Production Engineering

Investigation of damage development of polymer foams using interrupted in-situ X-ray tomography

D. Salaberger, S. Gerner, S. Kahlen, J. Kastner - Investigation of damage development of polymer foams using interrupted in-situ X-ray tomography - Proceedings of the 12th European Conference on Non-destructive Testing, Göteborg, Sweden, 2018, pp. 1-5
Thermoplastic foam materials were investigated by interrupted in-situ X-ray computed tomography. Scan setup and image processing procedure were optimized for…   mehr
  • Proceedings
  • Measuring and Testing Technolgy
  • Materials and Production Engineering

Seite 1 von 13
FH Oberösterreich Logo