FH Upper AustriaResearch & Development

Production and Operations Management Research Center Steyr Campus

Publications

Perspectives on Assistive Systems for Manual Assembly Tasks in Industry

J. Wolfartsberger, J. D. Hallewell Haslwanter, R. Lindorfer - Perspectives on Assistive Systems for Manual Assembly Tasks in Industry - Technologies, Vol. 7, No. 1, 2019, pp. 10
Small lot sizes in modern manufacturing present new challenges for people doing manual assembly tasks. Assistive systems, including context-aware instruction…   mehr
  • Journal
  • Production and Operations Management
  • Automated Control Engineering and Simulation

Increased Productivity by Predictive Maintenance and Data Visualization

H. Jodlbauer, J. Wolfartsberger, J. Zenisek, M. Brunner - Increased Productivity by Predictive Maintenance and Data Visualization - ZWF, Vol. 114, No. 4, 2019, pp. 181-183
Unscheduled machine downtimes due to delayed maintenance cause costs and bottlenecks in production and, in the worst case, reduces delivery reliability.…   mehr
  • Journal
  • Production and Operations Management

Material Requirements Planning Performance Improvement due to Safety Stock Relaxation

K. Altendorfer, S. Straßer, A. Peirleitner - Material Requirements Planning Performance Improvement due to Safety Stock Relaxation - International Journal on Advances in Systems and Measurements, Vol. 12, No. 1, 2019, pp. 89-100
Material Requirement Planning (MRP) is a broadly applied production planning method. One problem reported by practitioners and identified in research is that…   mehr
  • Journal
  • Production and Operations Management

Analyzing the potential of Virtual Reality for engineering design review

J. Wolfartsberger - Analyzing the potential of Virtual Reality for engineering design review - Automation in Construction, 2019, pp. 27-37
Virtual Reality (VR) technology still needs to evolve, but as the pace of innovations accelerates, systems allow for more novel modes of visualization and…   mehr
  • Journal
  • Production and Operations Management
  • Software Technology and Applications

Effect of limited capacity on optimal planning parameters for a multi-item production system with setup times and advance demand information

K. Altendorfer - Effect of limited capacity on optimal planning parameters for a multi-item production system with setup times and advance demand information - International Journal of Production Research, Vol. 57, No. 6, 2019, pp. 1892-1913
An analytical production/inventory model to optimize the planning parameters lot-size, safety stock and planned lead time is developed for a stochastic…   mehr
  • Journal
  • Production and Operations Management

Lost in Translation: Machine Translation and Text-To-Speech in Industry 4.0

J. D. Hallewell Haslwanter, M. Heiml, J. Wolfartsberger - Lost in Translation: Machine Translation and Text-To-Speech in Industry 4.0 - Proceedings of the 12th PErvasive Technologies Related to Assistive Environments Conference, Rhodos, Greece, 2019, pp. 10
Small lot sizes are becoming more common in modern manufacturing. Rather than automate every possible product variant, companies may rely on manual assembly to…   mehr
  • Proceedings
  • Production and Operations Management
  • Software Technology and Applications
  • Automated Control Engineering and Simulation

Industrial Perspectives on Assistive Systems for Manual Assembly Tasks

J. Wolfartsberger, J. D. Hallewell Haslwanter, R. Froschauer, R. Lindorfer, M. Jungwirth, D. Wahlmüller - Industrial Perspectives on Assistive Systems for Manual Assembly Tasks - Proceedings of the 11th PErvasive Technologies Related to Assistive Environments Conference, Corfu, Greece, 2018, pp. 289-291
Small lot sizes in modern manufacturing present new challenges for people doing manual assembly tasks. Assistance systems, including instruction systems and…   mehr
  • Proceedings
  • Production and Operations Management
  • Automated Control Engineering and Simulation

Chances and Limitations of a Virtual Reality-supported Tool for Decision Making in Industrial Engineering

J. Wolfartsberger, J. Zenisek, C. Sievi - Chances and Limitations of a Virtual Reality-supported Tool for Decision Making in Industrial Engineering - IFAC Symposium on Information Control Problems in Manufacturing, Bergamo, Italy, 2018, pp. 637-642
Besides from pure entertainment, Virtual Reality promises changes for the so-called Industry 4.0 sector. VR allows to visualize complex engineering data and…   mehr
  • Proceedings
  • Production and Operations Management

Optimal deployment of human-machine-collaboration

H. Jodlbauer, S. Straßer, J. Wolfartsberger - Optimal deployment of human-machine-collaboration - ZWF, Vol. 113, No. 2, 2018, pp. 52-54
  • Journal
  • Production and Operations Management

Reducing Variant Diversity by Clustering

S. Straßer, A. Peirleitner - Reducing Variant Diversity by Clustering - Proceedings DATA 2017, Madrid, Spain, 2017, pp. 141-148
  • Proceedings
  • Production and Operations Management

Relation between lead time dependent demand and capacity flexibility in a two-stage supply chain with lost sales

K. Altendorfer - Relation between lead time dependent demand and capacity flexibility in a two-stage supply chain with lost sales - International Journal of Production Economics, 2017, pp. 13-24
Supply chain literature shows that speed of delivery, or equivalently provided delivery lead time, is a crucial performance factor and influences the expected…   mehr
  • Journal
  • Production and Operations Management

Simulation-based Optimization for a Supply Chain with Load Bundling Opportunity

T. Felberbauer, A. Peirleitner, K. Altendorfer - Simulation-based Optimization for a Supply Chain with Load Bundling Opportunity - Simulation in Procuction and Logistics 2017, Kassel, Germany, 2017, pp. 139-148
  • Proceedings
  • Production and Operations Management

Simulation based Manufacturing System Improvement focusing on Capacity and MRP Decisions - A Practical Case from Mechanical Engineering

A. Peirleitner, K. Altendorfer, T. Felberbauer - Simulation based Manufacturing System Improvement focusing on Capacity and MRP Decisions - A Practical Case from Mechanical Engineering - Proceedings of the 2017 Winter Simulation Conference, Las Vegas, Nevada, United States of America, 2017, pp. 3876-3887
  • Proceedings
  • Production and Operations Management

Augmented Reality instead of assembly instructions on paper

J. Wolfartsberger, F. Obermair, S. Egger - Augmented Reality instead of assembly instructions on paper - productivity, 2017, pp. 58-61
Augmented Reality (AR) implements virtual information in the real world. The functionallity of an AR as a self assembly assitance system is shown in this…   mehr
  • Non-scientific
  • Production and Operations Management

Towards an Augmented Reality and Sensor-Based Assistive System for Assembly Tasks

J. Wolfartsberger, J. Zenisek, C. Sievi, M. Silmbroth - Towards an Augmented Reality and Sensor-Based Assistive System for Assembly Tasks - Proceedings of the 10th International Conference on PErvasive Technologies Related to Assistive Environments, Rhodes, Greece, 2017, pp. 230-231
Assistive systems provide tools to increase workers' productivity for industrial assembly and maintenance tasks. Current research focuses on showing…   mehr
  • Proceedings
  • Production and Operations Management

A Virtual Reality Supported 3D Environment for Engineering Design Review

J. Wolfartsberger, J. Zenisek, C. Sievi, M. Silmbroth - A Virtual Reality Supported 3D Environment for Engineering Design Review - 23rd International Conference on Virtual Systems and Multimedia, Dublin, Ireland, 2017, pp. 1-8
Reviewing industrial designs is a complex task, since it includes various stakeholders with diverging needs and visions. A well-organized review process is…   mehr
  • Proceedings
  • Production and Operations Management

A simulation approach for multi-stage supply chain optimization to analyze real world transportation effects

A. Peirleitner, K. Altendorfer, T. Felberbauer - A simulation approach for multi-stage supply chain optimization to analyze real world transportation effects - Proceedings of the 2016 Winter Simulation Conference, Arlington, Virginia, United States of America, 2016, pp. 2272-2283
  • Proceedings
  • Production and Operations Management

Augmented Reality as assistance system in assembly processes with successive information need

F. Obermair - Augmented Reality as assistance system in assembly processes with successive information need - Master/Diploma Thesis, FH OÖ, Austria, 2016, pp. 1-85
AR is seen as innovative, failure, time and cost saving technology, with a tenfold increased market share during the next five years. Scientific literature…   mehr
  • Report
  • Production and Operations Management

State probabilities for an M/M/1 queuing system with two capacity levels

A. Hübl, K. Altendorfer - State probabilities for an M/M/1 queuing system with two capacity levels - Proceedings of the 2015 Winter Simulation Conference, Huntington Beach, United States of America, 2015, pp. 2219-2226
Flexible capacity of production system gets in times of short-time working and economic crisis an increasingly important status. Therefore, models to handle…   mehr
  • Proceedings
  • Production and Operations Management
  • Logistikum - Logistics and Business Networks

Stochastic modelling in production planning

A. Hübl - Stochastic modelling in production planning - Phd Thesis, Universität Wien, Austria, 2015, pp. 1-158
In this thesis models for production planning are developed and performance indicators are analysed to investigate production system behaviour. Existing…   mehr
  • Report
  • Production and Operations Management
  • Logistikum - Logistics and Business Networks

Designing with Virtual Reality

F. Obermair - Designing with Virtual Reality - Desktop Engineering, 2015, pp. 55
In a rapidly globalizing market environment, commercial vehicle OEMs (original equipment manufacturers) and their suppliers are facing a very dynamic business…   mehr
  • Non-scientific
  • Production and Operations Management

Seite 1 von 7
FH Oberösterreich Logo