Linz CampusResearch Center

Publications

Analysis of plant materials pre-treated by steam explosion technology for their usability as insulating materials

A. Jäger, T. Schnabel, M. Huber, A. Petutschnigg - Analysis of plant materials pre-treated by steam explosion technology for their usability as insulating materials - Agronomy Research, Vol. 17, No. 1, 2019, pp. 1191-1198
Raw materials of annual plants fibres are not easily usable for industrial production applications. Pre-treatment of the annual plant fibres is necessary to…   mehr
  • Journal
  • Energy and the Environment

Nitrogen explosive decompression pre-treatment: An alternative to

M. Raud, K. Krennhuber, A. Jäger, T. Kikas - Nitrogen explosive decompression pre-treatment: An alternative to - Energy, Vol. 177, No. 4, 2019, pp. 175-182
When using the novel N2 explosive decompression pre-treatment, its effect was investigated in relation to the biomass structure and chemical processes during…   mehr
  • Journal
  • Energy and the Environment

Speciation of zinc and lead in the dust of a blast furnace

C. Lanzerstorfer - Speciation of zinc and lead in the dust of a blast furnace - Book of Abstracts 23rd Polish Conference of Chemical and Process Engineerin, Jachranka, Poland, 2019, pp. 78
• Distribution of Zn and Pb in various fractions in blast furnace dry dedusting residue determined • Zn is mainly present in the carbonate and oxide…   mehr
  • Proceedings
  • Energy and the Environment

Steelmaking dust: Speciation of zinc by sequential leaching

C. Lanzerstorfer, W. Preitschopf - Steelmaking dust: Speciation of zinc by sequential leaching - Proceedings 23rd International Conference on Environment and Mineral Processing, Ostrava, Czech Republic, 2019, pp. 105-108
In electric arc furnace (EAF) steelmaking significant amounts of dust are generated. The main component in the dust is usually iron. Additionally, increased…   mehr
  • Proceedings
  • Energy and the Environment

Stress dependence of the flowability and compressibility of building industry powders

C. Lanzerstorfer, P. Weissl - Stress dependence of the flowability and compressibility of building industry powders - Proceedings 15th Minisymposium Verfahrenstechni, Leoben, Austria, 2019, pp. 29-32
In this study, the stress dependence of the flowability and the bulk density of various building industry powders like cements, tile cements, plaster, hydrated…   mehr
  • Proceedings
  • Energy and the Environment

Tree-Based Reconfiguration Algorithm for Zonal Shipboard Power Systems

C. Neuwirt, J. D. Hallewell Haslwanter, M. Stanovich, K. Schoder, H. Ravindra, M. Steurer, C. Wong - Tree-Based Reconfiguration Algorithm for Zonal Shipboard Power Systems - Proceedings of IEEE Electric Ship Technologies Symposium (ESTS 2019), Arlington, VA, USA, United States of America, 2019, pp. 8
This paper presents a novel tree-based algorithm for reconfiguring an electrical system. We specifically consider a breakerless medium-voltage direct current…   mehr
  • Proceedings
  • Energy and the Environment
  • Automated Control Engineering and Simulation

Concentration ratios of metals between house dust and road dust

C. Lanzerstorfer - Concentration ratios of metals between house dust and road dust - Proceedings of the 17th International Conference on Chemistry and the Environment, Thessaloniki, Greece, 2019, pp. 540-543
The transport of soil adhering to footwear and the deposition of atmospheric dust are the two main migration pathways of inorganic contaminants indoors.…   mehr
  • Proceedings
  • Energy and the Environment

The water content of sand required for the maximum strength for building sand castles

C. Lanzerstorfer - The water content of sand required for the maximum strength for building sand castles - CARPATHIAN JOURNAL OF EARTH AND ENVIRONMENTAL SCIENCES, Vol. 14, No. 1, 2019, pp. 61-66
A sandy beach has a special attraction for people: building sand castles. The required ingredients are simply sand and water. But what about the mixing ratio…   mehr
  • Journal
  • Energy and the Environment

Deep-Learning-Bildverarbeitung von 3D-Laserscanner-Aufnahmen für ein Weichenstopf-Assistenzsystem

G. Zauner, T. Mueller, M. Bürger, F. Auer - Deep-Learning-Bildverarbeitung von 3D-Laserscanner-Aufnahmen für ein Weichenstopf-Assistenzsystem - ZEVrail, Vol. 143, No. 6, 2019
  • Journal
  • Automated Control Engineering and Simulation

Inverse Dynamics of an Industrial Robot Using Motion Constraints

T. Lauß, S. Oberpeilsteiner, K. Sherif, W. Steiner - Inverse Dynamics of an Industrial Robot Using Motion Constraints - 20th International Conference on Research and Education in Mechatronics (REM 2019), Wels, Austria, 2019
In multibody dynamics holonomic constraint equations exist because of mechanical joints, or specified motion trajectories. In order to solve the dynamic…   mehr
  • Proceedings
  • Automated Control Engineering and Simulation

Influence of the humidity on the flowability of straw combustion fly ash

M. Doppelbauer, C. Lanzerstorfer - Influence of the humidity on the flowability of straw combustion fly ash - Proceedings 15th Minisymposium Verfahrenstechni, Leoben, Austria, 2019, pp. 87
The flowability of a granular material is essential for the design and operation of transport equipment and storage facilities for such material. Thereby, the…   mehr
  • Proceedings
  • Energy and the Environment

Dynamic Volume Lines: Visual Comparison of 3D Volumes through Space-filling Curves

J. Weissenböck, B. Fröhler, E. Gröller, J. Kastner, C. Heinzl - Dynamic Volume Lines: Visual Comparison of 3D Volumes through Space-filling Curves - IEEE Transactions on Visualization and Computer Graphics (TVCG), Vol. 25, No. 1, 2019, pp. 1040-1049
The comparison of many members of an ensemble is difficult, tedious, and error-prone, which is aggravated by often just subtle differences. In this paper, we…   mehr
  • Journal
  • Measuring and Testing Technolgy

Influence of the Phase Transformation Behaviour on the Microstructure and Mechanical Properties of a 4.5 wt.-% Mn Q&P Steel

S. Kaar, R. Schneider, D. Krizan, C. Béal, C. Sommitsch - Influence of the Phase Transformation Behaviour on the Microstructure and Mechanical Properties of a 4.5 wt.-% Mn Q&P Steel - HTM Journal of Heat Treatment and Materials, Vol. 74, No. 2, 2019, pp. 70-83
  • Journal
  • Materials and Production Engineering

Estimation of Material Parameters from Pulse Phase Thermography Data

B. Stotter, K. Gresslehner, G. Mayr, G. Hendorfer, J. Sekelja - Estimation of Material Parameters from Pulse Phase Thermography Data - AIP Conference Proceedings, Baltimore, Spain, 2019
  • Proceedings
  • Measuring and Testing Technolgy

Influence of the Quenching and Partitioning Process on the Transformation Kinetics and Hardness in a Lean Medium Manganese TRIP Steel

S. Kaar, R. Schneider, D. Krizan, C. Béal, C. Sommitsch - Influence of the Quenching and Partitioning Process on the Transformation Kinetics and Hardness in a Lean Medium Manganese TRIP Steel - Metals, Vol. 9, No. 353, 2019, pp. 13
  • Journal
  • Materials and Production Engineering

Comparative Investigation of the Tensile Behavior of Two Medium Mn Q&P Steels

S. Kaar, R. Schneider, D. Krizan, C. Béal, C. Sommitsch - Comparative Investigation of the Tensile Behavior of Two Medium Mn Q&P Steels - Proceedings HMnS 2019, Aachen, Austria, 2019, pp. 37-40
  • Proceedings
  • Materials and Production Engineering

Bainitic transformation during the two-step Q&P process in a lean medium Mn steel containing silicon

S. Kaar, R. Schneider, D. Krizan, C. Béal, C. Sommitsch - Bainitic transformation during the two-step Q&P process in a lean medium Mn steel containing silicon - Proceedings ECHT 2019, Bardolino, Italy, 2019, pp. 10
  • Proceedings
  • Materials and Production Engineering

The upper size limit of the dust samples in road dust studies: benefits of a combined sieving and air classification sample preparation procedure

C. Lanzerstorfer, A. Logiewa - The upper size limit of the dust samples in road dust studies: benefits of a combined sieving and air classification sample preparation procedure - ENVIRONMENTAL POLLUTION, Vol. 245, No. 1, 2019, pp. 1079-1085
The concentrations of heavy metals and other components in road dust from a Polish coal mining district were investigated. The sample was split into eight size…   mehr
  • Journal
  • Energy and the Environment

Emissions and removal of gaseous pollutants from the top-gas of a blast furnace

C. Lanzerstorfer, W. Preitschopf, R. Neuhold, C. Feilmayr - Emissions and removal of gaseous pollutants from the top-gas of a blast furnace - ISIJ INTERNATIONAL, Vol. 59, No. 3, 2019, pp. 590-595
The emissions of a blast furnace and the separation efficiency of the top-gas scrubber were investigated for the gaseous components HCl, H2S, SO2, COS, CS2,…   mehr
  • Journal
  • Energy and the Environment

The Influence of Air-dispersed Essential Oils from Lemon (Citrus limon) and Silver fir (Abies alba) on Airborne Bacteria and Fungi in Hospital Rooms

A. Lanzerstorfer, M. Hackl, M. Schlömer, B. Rest, E. Deutsch-Grasl, C. Lanzerstorfer - The Influence of Air-dispersed Essential Oils from Lemon (Citrus limon) and Silver fir (Abies alba) on Airborne Bacteria and Fungi in Hospital Rooms - JOURNAL OF ENVIRONMENTAL SCIENCE AND HEALTH, PART A, Vol. 54, No. 3, 2019, pp. 256-260
Airborne bacteria and fungi are an ongoing problem in hospitals. Because of the antimicrobial activities of essential oils (EOs) dispersion of EOs into the air…   mehr
  • Journal
  • Energy and the Environment

Variation in the concentration of metals in road dust size fractions between 2 µm and 2 mm: results from three metallurgical centres in Poland

A. Logiewa, A. Miazgowicz, K. Krennhuber, C. Lanzerstorfer - Variation in the concentration of metals in road dust size fractions between 2 µm and 2 mm: results from three metallurgical centres in Poland - ARCHIVES OF ENVIRONMENTAL CONTAMINATION AND TOXICOLOGY, 2019, pp. 14
The composition of road dust is influenced by emissions from local industry as well as by traffic emissions. Thus, the composition of urban road dust can be…   mehr
  • Journal
  • Energy and the Environment

Seite 1 von 44
FH Oberösterreich Logo