Wels CampusResearch Center

Materials and Production Engineering Research Center Wels Campus

Publications

Supporting Teamwork in Industrial Virtual Reality Applications

J. Wolfartsberger, J. Zenisek, N. Wild - Supporting Teamwork in Industrial Virtual Reality Applications - Procedia Manufacturing, 2020, pp. 2-7
Virtual Reality (VR) systems allow for novel modes of visualization and interaction to support engineering design reviews. However, there are still research…   mehr
  • Journal
  • Software Technology and Applications
  • Materials and Production Engineering

X-ray computed tomography in bonded aircraft repairs for composites

F. Röper, B. Plank, J. Glinz, M. Wolfahrt, G. Kucher, G. Pinter - X-ray computed tomography in bonded aircraft repairs for composites - Proceedings of 10th Conference on Industrial Computed Tomography (iCT) 2020, Wels, Austria, 2020, pp. 1-6
As bonded composite repairs are gaining importance for modern civil aircraft, it is necessary to investigate such repairs in detail under relevant…   mehr
  • Proceedings
  • Measuring and Testing Technolgy
  • Materials and Production Engineering

Influence of the Phase Transformation Behaviour on the Microstructure and Mechanical Properties of a 4.5 wt.-% Mn Q&P Steel

S. Kaar, R. Schneider, D. Krizan, C. Béal, C. Sommitsch - Influence of the Phase Transformation Behaviour on the Microstructure and Mechanical Properties of a 4.5 wt.-% Mn Q&P Steel - HTM Journal of Heat Treatment and Materials, Vol. 74, No. 2, 2019, pp. 70-83
  • Journal
  • Materials and Production Engineering

Influence of the Quenching and Partitioning Process on the Transformation Kinetics and Hardness in a Lean Medium Manganese TRIP Steel

S. Kaar, R. Schneider, D. Krizan, C. Béal, C. Sommitsch - Influence of the Quenching and Partitioning Process on the Transformation Kinetics and Hardness in a Lean Medium Manganese TRIP Steel - Metals, Vol. 9, No. 353, 2019, pp. 13
  • Journal
  • Materials and Production Engineering

Comparative Investigation of the Tensile Behavior of Two Medium Mn Q&P Steels

S. Kaar, R. Schneider, D. Krizan, C. Béal, C. Sommitsch - Comparative Investigation of the Tensile Behavior of Two Medium Mn Q&P Steels - Proceedings HMnS 2019, Aachen, Austria, 2019, pp. 37-40
  • Proceedings
  • Materials and Production Engineering

Bainitic transformation during the two-step Q&P process in a lean medium Mn steel containing silicon

S. Kaar, R. Schneider, D. Krizan, C. Béal, C. Sommitsch - Bainitic transformation during the two-step Q&P process in a lean medium Mn steel containing silicon - Proceedings ECHT 2019, Bardolino, Italy, 2019, pp. 10
  • Proceedings
  • Materials and Production Engineering

BONDED COMPOSITE REPAIRS UNDER DRY/COLD AND HOT/WET ENVIRONMENTAL CONDITIONS

F. Röper, C. Hannesschläger, B. Plank, M. Wolfahrt, G. Kucher, G. Pinter - BONDED COMPOSITE REPAIRS UNDER DRY/COLD AND HOT/WET ENVIRONMENTAL CONDITIONS - Proceedings of the 22nd International Conference on Composite Materials, Melbourne, Australia, 2019, pp. 1-12
Composite structures are increasingly present in various types of structures, especially in the aircraft industry. As a result, suitable repair strategies have…   mehr
  • Proceedings
  • Measuring and Testing Technolgy
  • Materials and Production Engineering

Melting of Mixtures of PP‑H/ HDPE and PP‑H/PMMA Bulk Solids Related to Single Screw Extrusion

C. Kneidinger, G. Zitzenbacher, C. Bruckbauer, E. Schröcker, J. Miethlinger - Melting of Mixtures of PP‑H/ HDPE and PP‑H/PMMA Bulk Solids Related to Single Screw Extrusion - Proceedings of PPS35, 2019 Izmir, International Conference of the Polymer Processing Society, Izmir, Turkey, Austria, 2019, pp. 1
Single screw extruders are the most important machines in polymer processing. The melting or plasticating process is often the limiting factor of these…   mehr
  • Proceedings
  • Materials and Production Engineering

Multiscale and Multimodal Approaches for Threedimensional Materials Characterisation of Fibre Reinforced Polymers by Means of X-ray based NDT Methods

B. Plank, M. Schiwarth, S. Senck, J. Herr, S. Ayalur-Karunakaran , J. Kastner - Multiscale and Multimodal Approaches for Threedimensional Materials Characterisation of Fibre Reinforced Polymers by Means of X-ray based NDT Methods - Proceedings of International Symposium on Digital Industrial Radiology and Computed Tomography (DIR2019), Fürth, Fürth, Germany, 2019, pp. 1-11
Non-destructive testing (NDT) and three-dimensional materials characterisation of fibre reinforced polymers using X-ray based methods can be carried out at…   mehr
  • Proceedings
  • Measuring and Testing Technolgy
  • Materials and Production Engineering

Structure-properties relationship in lean medium Mn Quenching and Partitioning steels

S. Kaar, D. Krizan, R. Schneider, C. Béal, C. Sommitsch - Structure-properties relationship in lean medium Mn Quenching and Partitioning steels - Proceedings Euromat 2019, Stockholm, Sweden, 2019
  • Proceedings
  • Materials and Production Engineering

Effect of Manganese on the Structure-Properties Relationship of Cold Rolled AHSS Treated by a Quenching and Partitioning Process

S. Kaar, D. Krizan, R. Schneider, C. Béal, C. Sommitsch - Effect of Manganese on the Structure-Properties Relationship of Cold Rolled AHSS Treated by a Quenching and Partitioning Process - Metals, Vol. 9, No. 10, 2019, pp. 1-15
  • Journal
  • Materials and Production Engineering

Development of third generation advanced high strength steels for automotive applications

D. Krizan, K. Steineder, S. Kaar, T. Hebesberger - Development of third generation advanced high strength steels for automotive applications - Proceedings Transfer 2018, Trencin, Slovakia, 2018
  • Proceedings
  • Materials and Production Engineering

Influence of the Al and Mn content on the structure-property relationship in density reduced TRIP-assisted sheet steels

S. Kaar, D. Krizan, C. Commenda, L. Samek - Influence of the Al and Mn content on the structure-property relationship in density reduced TRIP-assisted sheet steels - MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROST RUCTURE AND PROCESSING, 2018, pp. 475-486
  • Journal
  • Materials and Production Engineering

Influence of the phase transformation behavior on the microstructure

S. Kaar, R. Schneider, D. Krizan, C. Sommitsch, C. Béal - Influence of the phase transformation behavior on the microstructure - Proceedings Heat Treatment Congress 2018, Köln, Germany, 2018, pp. 33
  • Proceedings
  • Materials and Production Engineering

Melting of Heterogeneous Polymer Bulk Solids

C. Kneidinger, G. Zitzenbacher, M. Längauer, C. Bruckbauer, J. Miethlinger - Melting of Heterogeneous Polymer Bulk Solids - Polymer Processing Society (PPS2018) Boston, Boston, United States of America, 2018
Single screw extruders are the most important machines in polymer processing. The melting or plasticating process is often the limiting factor of these…   mehr
  • Proceedings
  • Materials and Production Engineering

Single fibre characterization of heavily curved polymer fibres using X-ray computed tomography

D. Salaberger, T. Lummerstorfer, M. Jerabek, J. Kastner - Single fibre characterization of heavily curved polymer fibres using X-ray computed tomography - Proceedings of the 18th European Conference on Composite Materials, Athens, Greece, 2018, pp. 1-6
The material system polypropylene filled with long polyethylene terephthalate fibres was investigated by CT analyses. Micro-structural features as length,…   mehr
  • Proceedings
  • Measuring and Testing Technolgy
  • Materials and Production Engineering

Investigation of damage development of polymer foams using interrupted in-situ X-ray tomography

D. Salaberger, S. Gerner, S. Kahlen, J. Kastner - Investigation of damage development of polymer foams using interrupted in-situ X-ray tomography - Proceedings of the 12th European Conference on Non-destructive Testing, Göteborg, Sweden, 2018, pp. 1-5
Thermoplastic foam materials were investigated by interrupted in-situ X-ray computed tomography. Scan setup and image processing procedure were optimized for…   mehr
  • Proceedings
  • Measuring and Testing Technolgy
  • Materials and Production Engineering

High-resolution X-ray computed tomography of inhomogeneous materials

C. Gusenbauer, M. Reiter, D. Salaberger, B. Plank, J. Kastner - High-resolution X-ray computed tomography of inhomogeneous materials - Proceedings of the 12th European Conference on Non-destructive Testing, Göteborg, Sweden, 2018, pp. 1-8
In this contribution, high-resolution X-ray computed tomography (XCT) results of various inhomogeneous samples including a poplar wood sample, a carbon fibre…   mehr
  • Proceedings
  • Measuring and Testing Technolgy
  • Materials and Production Engineering

Porous carbon templates from thermoset-based wood polymer composites as precursor for silicon carbide ceramics

C. Unterweger, B. Plank, S. Senck, M. Mihalic, C. Fürst - Porous carbon templates from thermoset-based wood polymer composites as precursor for silicon carbide ceramics - Carbon 2018, Madrid, Spanien, Spain, 2018, pp. 1-2
  • Proceedings
  • Materials and Production Engineering

Bio-based silicon carbide ceramics from extruded thermoset-based wood polymer composites

C. Fürst, B. Plank, S. Senck, M. Mihalic, C. Unterweger - Bio-based silicon carbide ceramics from extruded thermoset-based wood polymer composites - 18th European Conference on Composite Materials, Athens, Greece, 2018, pp. 1-7
  • Proceedings
  • Materials and Production Engineering

Water vapour diffusion resistance of larch (Larix decidua) bark insulation panels and application considerations based on numeric modelling

S. Senck, G. Kain, B. Lienbacher, M. Barbu, A. Petutschnigg - Water vapour diffusion resistance of larch (Larix decidua) bark insulation panels and application considerations based on numeric modelling - CONSTRUCTION AND BUILDING MATERIALS, 2018, pp. 308-316
  • Journal
  • Materials and Production Engineering

Page 1 from 10
FH Oberösterreich Logo