FH OberösterreichForschung & Entwicklung

Werkstoff- und Produktionstechnik Research Center Wels

Publikationen

Influence of the Al and Mn content on the structure-property relationship in density reduced TRIP-assisted sheet steels

S. Kaar, D. Krizan, C. Commenda, L. Samek - Influence of the Al and Mn content on the structure-property relationship in density reduced TRIP-assisted sheet steels - MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROST RUCTURE AND PROCESSING, 2018, pp. 475-486
  • Journal
  • Werkstoff- und Produktionstechnik

Einfluss des Umwandlungsverhaltens auf das Gefüge und die

S. Kaar, R. Schneider, D. Krizan, C. Sommitsch, C. Béal - Einfluss des Umwandlungsverhaltens auf das Gefüge und die - Proceedings Härtereikongress 2018, Köln, Deutschland, 2018, pp. 33
  • Tagungsband
  • Werkstoff- und Produktionstechnik

Melting of Heterogeneous Polymer Bulk Solids

C. Kneidinger, G. Zitzenbacher, M. Längauer, C. Bruckbauer, J. Miethlinger - Melting of Heterogeneous Polymer Bulk Solids - Polymer Processing Society (PPS2018) Boston, Boston, Vereinigte Staaten von Amerika, 2018
Single screw extruders are the most important machines in polymer processing. The melting or plasticating process is often the limiting factor of these...   mehr
  • Tagungsband
  • Werkstoff- und Produktionstechnik

Single fibre characterization of heavily curved polymer fibres using X-ray computed tomography

D. Salaberger, T. Lummerstorfer, M. Jerabek, J. Kastner - Single fibre characterization of heavily curved polymer fibres using X-ray computed tomography - Proceedings of the 18th European Conference on Composite Materials, Athens, Griechenland, 2018, pp. 1-6
The material system polypropylene filled with long polyethylene terephthalate fibres was investigated by CT analyses. Micro-structural features as length,...   mehr
  • Tagungsband
  • Mess- und Prüftechnik
  • Werkstoff- und Produktionstechnik

Investigation of damage development of polymer foams using interrupted in-situ X-ray tomography

D. Salaberger, S. Gerner, S. Kahlen, J. Kastner - Investigation of damage development of polymer foams using interrupted in-situ X-ray tomography - Proceedings of the 12th European Conference on Non-destructive Testing, Göteborg, Schweden, 2018, pp. 1-5
Thermoplastic foam materials were investigated by interrupted in-situ X-ray computed tomography. Scan setup and image processing procedure were optimized for...   mehr
  • Tagungsband
  • Mess- und Prüftechnik
  • Werkstoff- und Produktionstechnik

High-resolution X-ray computed tomography of inhomogeneous materials

C. Gusenbauer, M. Reiter, D. Salaberger, B. Plank, J. Kastner - High-resolution X-ray computed tomography of inhomogeneous materials - Proceedings of the 12th European Conference on Non-destructive Testing, Göteborg, Schweden, 2018, pp. 1-8
In this contribution, high-resolution X-ray computed tomography (XCT) results of various inhomogeneous samples including a poplar wood sample, a carbon fibre...   mehr
  • Tagungsband
  • Mess- und Prüftechnik
  • Werkstoff- und Produktionstechnik

Porous carbon templates from thermoset-based wood polymer composites as precursor for silicon carbide ceramics

C. Unterweger, B. Plank, S. Senck, M. Mihalic, C. Fürst - Porous carbon templates from thermoset-based wood polymer composites as precursor for silicon carbide ceramics - Carbon 2018, Madrid, Spanien, Spanien, 2018, pp. 1-2
  • Tagungsband
  • Werkstoff- und Produktionstechnik

Bio-based silicon carbide ceramics from extruded thermoset-based wood polymer composites

C. Fürst, B. Plank, S. Senck, M. Mihalic, C. Unterweger - Bio-based silicon carbide ceramics from extruded thermoset-based wood polymer composites - ECCM18, Athens, Griechenland, 2018, pp. 1-7
  • Tagungsband
  • Werkstoff- und Produktionstechnik

Water vapour diffusion resistance of larch (Larix decidua) bark insulation panels and application considerations based on numeric modelling

S. Senck, G. Kain, B. Lienbacher, M. Barbu, A. Petutschnigg - Water vapour diffusion resistance of larch (Larix decidua) bark insulation panels and application considerations based on numeric modelling - CONSTRUCTION AND BUILDING MATERIALS, 2018, pp. 308-316
  • Journal
  • Werkstoff- und Produktionstechnik

Investigation of new volumetric non-destructive techniques to characterise additive manufacturing parts

A. Obaton, M. Lê, V. Prezza, D. Marlot, P. Delvart, A. Huskic, S. Senck, E. Mahé, C. Cayron - Investigation of new volumetric non-destructive techniques to characterise additive manufacturing parts - Welding in the World, 2018, pp. 1049-1057
  • Journal
  • Werkstoff- und Produktionstechnik

Effects of Powder Preheating on Processing of Selective Laser Melted Tool Steels

A. Huskic, J. Giedenbacher, S. Wallner, C. Sommitsch - Effects of Powder Preheating on Processing of Selective Laser Melted Tool Steels - Direct Digital Manufacturing, Berlin, Deutschland, 2018
  • Tagungsband
  • Werkstoff- und Produktionstechnik

Influence of the quenching and partitioning process on the isothermal bainitic transformation kinetics in a lean medium manganese steel

S. Kaar, R. Schneider, D. Krizan, C. Béal, C. Sommitsch - Influence of the quenching and partitioning process on the isothermal bainitic transformation kinetics in a lean medium manganese steel - Proc. of the 25th Congr. of IFHTSE, Xian, China, 2018, pp. 48
  • Tagungsband
  • Werkstoff- und Produktionstechnik

ALTERNATIVE METHODS FOR DETERMINING MICROCLEANLINESS: A STUDY BASED ON HOT WORK TOOL STEELS

W. Schützenhöfer, C. Decker, B. Plank, E. Plesiutschnig - ALTERNATIVE METHODS FOR DETERMINING MICROCLEANLINESS: A STUDY BASED ON HOT WORK TOOL STEELS - IFM 2017 – 20th International Forgemasters Meeting 2017, Graz, Österreich, 2017, pp. 10
This study focuses on the development and comparison of standard and alternative methods to evaluate the cleanliness of hot work tool steels used for dies on a...   mehr
  • Tagungsband
  • Mess- und Prüftechnik
  • Werkstoff- und Produktionstechnik

4D Röntgen-Computertomografie mittels konventioneller Labor CTs: Möglichkeiten und Einschränkungen

B. Plank, D. Salaberger, G. Rao, A. Amirkhanov, J. Kastner - 4D Röntgen-Computertomografie mittels konventioneller Labor CTs: Möglichkeiten und Einschränkungen - DGZfP-Jahrestagung 2017, Koblenz, Deutschland, 2017, pp. 9
In Bauteile zu schauen um die innere Geometrie sowie Struktur dreidimensional zu charakterisieren ist mittlerweile ein Standardanwendungsgebiet der...   mehr
  • Tagungsband
  • Mess- und Prüftechnik
  • Werkstoff- und Produktionstechnik

Determination of a new empirical Ms-formula suitable for Medium-Mn-steels

R. Schneider, K. Steineder, A. Watanabe, M. Okumiya, D. Krizan, C. Sommitsch - Determination of a new empirical Ms-formula suitable for Medium-Mn-steels - Proceedings of the 24th IFHTSE CONGRESS 2017 - European Conference on Heat Treatment and Surface Engineering , Nice, Frankreich, 2017, pp. 1-9
  • Tagungsband
  • Werkstoff- und Produktionstechnik

Influence of different cladding processes on microstructure and wear performance of tungsten carbide reinforced nickel-base alloys

S. Lang, R. Schneider, G. Posch, V. Jank, H. Scharner, W. Lutz, R. Kröschel - Influence of different cladding processes on microstructure and wear performance of tungsten carbide reinforced nickel-base alloys - Proceedings of the 24th IFHTSE CONGRESS 2017 - European Conference on Heat Treatment and Surface Engineering , Nice, Frankreich, 2017, pp. 1-9
  • Tagungsband
  • Werkstoff- und Produktionstechnik

On the microstructural characteristics influencing the yielding behavior of ultra-fine grained medium-Mn steels

K. Steineder, D. Krizan, R. Schneider, C. Béal, C. Sommitsch - On the microstructural characteristics influencing the yielding behavior of ultra-fine grained medium-Mn steels - ACTA MATERIALIA, 2017, pp. 39-50
  • Journal
  • Werkstoff- und Produktionstechnik

Retained Austenite Stability in Al-alloyed Medium Manganese Steels

S. Kaar, D. Krizan, C. Commenda, L. Samek - Retained Austenite Stability in Al-alloyed Medium Manganese Steels - Proceedings ISDM 2017, Leoben, Österreich, 2017
  • Tagungsband
  • Werkstoff- und Produktionstechnik

Einfluss der Schutzgasatmosphäre auf das Elektro-Schlacke-Umschmelzen

M. Molnar, R. Schneider, G. Klösch, C. Schüller - Einfluss der Schutzgasatmosphäre auf das Elektro-Schlacke-Umschmelzen - Conference Proceedings ISDM 2017, Leoben, Österreich, 2017, pp. 16-24
  • Tagungsband
  • Werkstoff- und Produktionstechnik

Microstructure dependent damage mechanisms in 3D using X-ray tomography

M. Jerabek, D. Salaberger, A. Amirkhanov, J. Kastner - Microstructure dependent damage mechanisms in 3D using X-ray tomography - Proceedings of the 21st International conference on Composite Materials, Xian, China, 2017, pp. 1-5
XCT was used to characterise the microstructure of short glass fibre reinforced polymers. Tools to determine local parameters like fibre orientation,...   mehr
  • Tagungsband
  • Mess- und Prüftechnik
  • Werkstoff- und Produktionstechnik

Influence of different welding processes on microstructure and wear performance of Ni-WC hardfacings

S. Lang, R. Schneider, G. Posch, V. Jank, H. Scharner, W. Lutz, R. Kröschel - Influence of different welding processes on microstructure and wear performance of Ni-WC hardfacings - Conference Proceedings ISDM 2017, Leoben, Österreich, 2017, pp. 32-39
  • Tagungsband
  • Werkstoff- und Produktionstechnik

Seite 1 von 9
FH Oberösterreich Logo