Campus HagenbergResearch Center

Publikationen

Performance und Degradationsanalysis von PV Modulen und Systemen

A. Högl, R. Höller, Y. Ueda - Performance und Degradationsanalysis von PV Modulen und Systemen - Proceedings 15. Symposium Energieinnovation, Graz, Österreich, 2018, pp. 20-30
Diese Arbeit befasst sich mit der Langzeitperformance verschiedener Photovoltaikmodultypen. Hierfür wurden Messdaten zweier Modulteststellen in Japan und…   mehr
  • Tagungsband
  • Energie und Umwelt

Management of Residues from Air Pollution Control

C. Lanzerstorfer - Management of Residues from Air Pollution Control in Handbook of Environmental Materials Management, (Editors: C. M. Hussain), 2018, pp. 1-20
This chapter gives an overview of the residues generated in various industrial air pollution control processes. After summarizing the amount of resulting…   mehr
  • Buch/Buchbeitrag
  • Energie und Umwelt

Single fibre characterization of heavily curved polymer fibres using X-ray computed tomography

D. Salaberger, T. Lummerstorfer, M. Jerabek, J. Kastner - Single fibre characterization of heavily curved polymer fibres using X-ray computed tomography - Proceedings of the 18th European Conference on Composite Materials, Athens, Griechenland, 2018, pp. 1-6
The material system polypropylene filled with long polyethylene terephthalate fibres was investigated by CT analyses. Micro-structural features as length,…   mehr
  • Tagungsband
  • Mess- und Prüftechnik
  • Werkstoff- und Produktionstechnik

Investigation of damage development of polymer foams using interrupted in-situ X-ray tomography

D. Salaberger, S. Gerner, S. Kahlen, J. Kastner - Investigation of damage development of polymer foams using interrupted in-situ X-ray tomography - Proceedings of the 12th European Conference on Non-destructive Testing, Göteborg, Schweden, 2018, pp. 1-5
Thermoplastic foam materials were investigated by interrupted in-situ X-ray computed tomography. Scan setup and image processing procedure were optimized for…   mehr
  • Tagungsband
  • Mess- und Prüftechnik
  • Werkstoff- und Produktionstechnik

High-resolution X-ray computed tomography of inhomogeneous materials

C. Gusenbauer, M. Reiter, D. Salaberger, B. Plank, J. Kastner - High-resolution X-ray computed tomography of inhomogeneous materials - Proceedings of the 12th European Conference on Non-destructive Testing, Göteborg, Schweden, 2018, pp. 1-8
In this contribution, high-resolution X-ray computed tomography (XCT) results of various inhomogeneous samples including a poplar wood sample, a carbon fibre…   mehr
  • Tagungsband
  • Mess- und Prüftechnik
  • Werkstoff- und Produktionstechnik

Feasibility of air classification in dust recycling in the iron and steel industry

C. Lanzerstorfer, A. Angerbauer, M. Gaßlbauer - Feasibility of air classification in dust recycling in the iron and steel industry - STEEL RESEARCH INTERNATIONAL, Vol. 89, No. 7, 2018, pp. 6
The potential of air classification of dusts from dry off-gas cleaning for improved recycling of these dusts is investigated. By air classification a dust can…   mehr
  • Journal
  • Energie und Umwelt

Composition of Cement Kiln Dust by Particle Size

C. Lanzerstorfer - Composition of Cement Kiln Dust by Particle Size - Proceedings of the International V4 Waste Recycling 21 Conference, Miskolc, Ungarn, 2018, pp. 115-121
In cement mills large amounts of dust are separated from the kiln off-gas by the de-dusting filters. According to the Best Available Techniques (BAT) Reference…   mehr
  • Tagungsband
  • Energie und Umwelt

Autonomes Fahren auf Regionalbahnen - Projekt autoBAHN2020

B. Stadlmann, L. Neumann - Autonomes Fahren auf Regionalbahnen - Projekt autoBAHN2020 - Forum Mobil, 2018, pp. 8-9
Es wird ein kurzer Überbrlick gegeben über Anwendungsfälle automatisierten Fahrens auf der Schiene. Weiters wird das Projekt autoBAHN2020 vorgestellt mit Fokus…   mehr
  • Populärwissenschaftlich
  • Automatisierungstechnik und Simulationen

Porosity determination of carbon and glass fibre reinforced polymers using phase-contrast imaging

C. Gusenbauer, M. Reiter, B. Plank, D. Salaberger, S. Senck, J. Kastner - Porosity determination of carbon and glass fibre reinforced polymers using phase-contrast imaging - JOURNAL OF NONDESTRUCTIVE EVALUATION, Vol. 10921, No. 4, 2018, pp. 1-10
  • Journal
  • Mess- und Prüftechnik

Challenges for grating interferometer X-ray computed tomography for practical applications in industry

J. Kastner, C. Gusenbauer, B. Plank, J. Glinz, S. Senck - Challenges for grating interferometer X-ray computed tomography for practical applications in industry - Proceedings of the 12th European Conference on Non-destructive Testing, Göteborg, Schweden, 2018
  • Tagungsband
  • Mess- und Prüftechnik

Fly ash from coal combustion: Dependence of the concentration of various elements on the particle size

C. Lanzerstorfer - Fly ash from coal combustion: Dependence of the concentration of various elements on the particle size - FUEL, Vol. 228, No. 1, 2018, pp. 263-271
The dependence of the distribution of various elements on the particle size of coal combustion fly ash is of special interest for use of the fly ash in…   mehr
  • Journal
  • Energie und Umwelt

X-Ray Tomography

J. Kastner, C. Heinzl - X-Ray Tomography in Handbook of Advanced Non-Destructive Evaluation (Editors: Ida N., Meyendorf N.) - Springer, 2018, pp. 1-72
Over the past years, a large number of novel X-ray imaging and data processing methods have been developed. The application areas of X-ray computed tomography…   mehr
  • Buch/Buchbeitrag
  • Mess- und Prüftechnik

Porosity Determination in CFRP by means of X-ray Computed Tomography Methods

B. Plank, C. Gusenbauer, S. Senck, H. Höller, J. Kastner - Porosity Determination in CFRP by means of X-ray Computed Tomography Methods - Proceedings of the 12th European Conference on Non-destructive Testing, Göteborg, Schweden, 2018, pp. 1-2
This contribution deals with material- and X-ray computed tomography (XCT) parameters influencing the quantitative evaluation of porosity in carbon fibre…   mehr
  • Tagungsband
  • Mess- und Prüftechnik

Bier als Getränk nach Sport und Arbeit

A. Jäger, K. Krennhuber - Bier als Getränk nach Sport und Arbeit - BierIG-Magazin, Vol. 11, No. 1, 2018, pp. 28-29
Wer körperlich arbeitet, wer Sport treibt und wer schwitzt, verliert Flüssigkeit und Mineralstoffe. Die Folgen sind vielfältig: geringeres Blutvolumen, erhöhte…   mehr
  • Journal
  • Energie und Umwelt

Processing, Analysis and Visualization of CT Data

C. Heinzl, A. Amirkhanov, J. Kastner - Processing, Analysis and Visualization of CT Data in Industrial X-Ray Computed Tomography (Editors: Carmignato S., Dewulf W., Leach R.) - Springer, 2018, pp. 99-142
In an almost inexhaustible multitude of possibilities, CT allows to inspect highly complex systems and materials. Compared to other testing techniques CT…   mehr
  • Buch/Buchbeitrag
  • Mess- und Prüftechnik

A practice-oriented approach to overcome knowledge-sharing boundaries in innovation projects

C. Rau, A. Neyer, K. Krämer-Helmer - A practice-oriented approach to overcome knowledge-sharing boundaries in innovation projects in Leveraging Constraints for Innovation (Editors: S. Gurtner, J. Spanjol, A. Griffin) - Wiley-VCH Verlag GmbH & Co. KGaA, 2018, pp. 19-37
  • Buch/Buchbeitrag
  • Innovations- und Technologiemanagement

Odour reduction of manure through addition of boracic charcoal

G. Hampejs, A. Jäger - Odour reduction of manure through addition of boracic charcoal - Agronomy Research, Vol. 16, No. 3, 2018, pp. 708-716
Odours released during the land application of manure results from different gases released from the liquid phase. These gases do create objectionable odours…   mehr
  • Journal
  • Energie und Umwelt

What Makes the Difference? Why Does Design Thinking Lead to Superior Project Performance?

K. Roth, C. Rau, D. Globocnik, A. Neyer - What Makes the Difference? Why Does Design Thinking Lead to Superior Project Performance? - Proceedings of the 25th IPDMC, Porto, Portugal, 2018
  • Tagungsband
  • Innovations- und Technologiemanagement

Design Thinking: Not Just an Innovation Management Tool?

K. Roth, C. Rau, D. Globocnik, A. Neyer - Design Thinking: Not Just an Innovation Management Tool? - Proceedings of the 2018 ISPIM Innovation Forum (Boston), Boston, Vereinigte Staaten von Amerika, 2018
  • Tagungsband
  • Innovations- und Technologiemanagement

Heavy metals in the finest size fractions of road-deposited sediments

C. Lanzerstorfer - Heavy metals in the finest size fractions of road-deposited sediments - ENVIRONMENTAL POLLUTION, Vol. 239, No. 1, 2018, pp. 522-531
The concentration of heavy metals in urban road-deposited sediments (RDS) can be used as an indicator for environmental pollution. Thus, their occurrence has…   mehr
  • Journal
  • Energie und Umwelt

Odour reduction of manure through addition of boracic charcoal

G. Hampejs, A. Jäger - Odour reduction of manure through addition of boracic charcoal - Agronomy Research, Vol. 16, No. 3, 2018, pp. 708-716
Odours released during the land application of manure results from different gases released from the liquid phase. These gases do create objectionable odours…   mehr
  • Journal
  • Energie und Umwelt

Seite 6 von 44
FH Oberösterreich Logo