Campus HagenbergResearch Center

Publikationen

Valuing electricity-dependent infrastructure: An essential-input approach

J. Cohen, K. Moeltner, J. Reichl, M. Schmidthaler - Valuing electricity-dependent infrastructure: An essential-input approach - ENERGY ECONOMICS, Vol. 73, No. 2018, 2018, pp. 258-273
  • Journal
  • Energie und Umwelt

Influence of the quenching and partitioning process on the isothermal bainitic transformation kinetics in a lean medium manganese steel

S. Kaar, R. Schneider, D. Krizan, C. Béal, C. Sommitsch - Influence of the quenching and partitioning process on the isothermal bainitic transformation kinetics in a lean medium manganese steel - Proc. of the 25th Congr. of IFHTSE, Xian, China, 2018, pp. 48
  • Tagungsband
  • Werkstoff- und Produktionstechnik

Grate-fired biomass combustion plants using forest residues as fuel: Enrichment factors for components in the fly ash

C. Lanzerstorfer - Grate-fired biomass combustion plants using forest residues as fuel: Enrichment factors for components in the fly ash - WASTE AND BIOMASS VALORIZATION, Vol. 8, No. 1, 2017, pp. 235-240
The aim of this work is to investigate the enrichment factors for various nutrients and heavy metals in the fly ash from grate-fired combustion plants using…   mehr
  • Journal
  • Energie und Umwelt

Determination of Parasitic Capacitances in Inductive Components - A Comparison Between Analytic Calculation Methods and FEM-Simulation

S. Merschak, M. Jungwirth, D. Hofinger, A. Eder, G. Ritzberger - Determination of Parasitic Capacitances in Inductive Components - A Comparison Between Analytic Calculation Methods and FEM-Simulation - Computer Aided Systems Theory – EUROCAST 2017, Las Palmas de Gran Canaria, Spanien, 2017, pp. 212-218
  • Tagungsband
  • Energie und Umwelt
  • Automatisierungstechnik und Simulationen

Using design languages in model-based mechatronic system design processes

A. Sadlauer, P. Hehenberger - Using design languages in model-based mechatronic system design processes - International Journal of Agile Systems and Management, Vol. 10, No. 1, 2017, pp. 73-91
  • Journal
  • Automatisierungstechnik und Simulationen

Air Classification of Dust from Steel Converter Secondary De-dusting for Zinc Enrichment

C. Lanzerstorfer - Air Classification of Dust from Steel Converter Secondary De-dusting for Zinc Enrichment - Proceedings 19th International Conference on Environmental and Chemical Engineering, Innsbruck, Österreich, 2017, pp. 2345-2352
The off-gas from the basic oxygen furnace (BOF), where pig iron is converted into steel, is treated in the primary ventilation system. This system is in full…   mehr
  • Tagungsband
  • Energie und Umwelt

Distributed Data Management in Product Development using Git

A. Jordan, K. Anzengruber, P. Hehenberger - Distributed Data Management in Product Development using Git - Int. J. Product Lifecycle Management, Vol. 10, No. 1, 2017
  • Journal
  • Automatisierungstechnik und Simulationen

Use of Technologically and Topologically Related Surfaces (TTRS) Geometrical Theory for Mechatronic Design Ontology

R. Plateaux, O. Penas, R. Barbedienne, P. Hehenberger, J. Choley, A. Warniez - Use of Technologically and Topologically Related Surfaces (TTRS) Geometrical Theory for Mechatronic Design Ontology - Computer-Aided Design and Applications, 2017
  • Journal
  • Automatisierungstechnik und Simulationen

Strategies for the Prevention and (Subsequent) Use of Food Waste from Hospitality and Restaurant Industries

A. Jäger, K. Krennhuber, D. Vaught, P. Kuttner, D. Lehner - Strategies for the Prevention and (Subsequent) Use of Food Waste from Hospitality and Restaurant Industries - International Journal of Food and Biosystems Engineering, Vol. 4, No. 1, 2017, pp. 34-42
1.3 billion tons of food is wasted annually all along the production chain (FAO, 2011) and by consumers. This is not only an ethical and an economic challenge…   mehr
  • Journal
  • Lebensmittel- und Biotechnologie

ALTERNATIVE METHODS FOR DETERMINING MICROCLEANLINESS: A STUDY BASED ON HOT WORK TOOL STEELS

W. Schützenhöfer, C. Decker, B. Plank, E. Plesiutschnig - ALTERNATIVE METHODS FOR DETERMINING MICROCLEANLINESS: A STUDY BASED ON HOT WORK TOOL STEELS - IFM 2017 – 20th International Forgemasters Meeting 2017, Graz, Österreich, 2017, pp. 10
This study focuses on the development and comparison of standard and alternative methods to evaluate the cleanliness of hot work tool steels used for dies on a…   mehr
  • Tagungsband
  • Mess- und Prüftechnik
  • Werkstoff- und Produktionstechnik

4D Röntgen-Computertomografie mittels konventioneller Labor CTs: Möglichkeiten und Einschränkungen

B. Plank, D. Salaberger, G. Rao, A. Amirkhanov, J. Kastner - 4D Röntgen-Computertomografie mittels konventioneller Labor CTs: Möglichkeiten und Einschränkungen - DGZfP-Jahrestagung 2017, Koblenz, Deutschland, 2017, pp. 9
In Bauteile zu schauen um die innere Geometrie sowie Struktur dreidimensional zu charakterisieren ist mittlerweile ein Standardanwendungsgebiet der…   mehr
  • Tagungsband
  • Mess- und Prüftechnik
  • Werkstoff- und Produktionstechnik

Optimal input design with open-source tools]{Open-source tool-chain for optimal input design for dynamical systems

S. Mayr, G. Grabmair - Optimal input design with open-source tools]{Open-source tool-chain for optimal input design for dynamical systems - PAMM vol.17, Weimar, Deutschland, 2017, pp. 747-748
  • Tagungsband
  • Automatisierungstechnik und Simulationen

Top-gas cleaning at blast furnaces: comparison of wet and dry systems

C. Lanzerstorfer, S. Grill, A. Steinwandter - Top-gas cleaning at blast furnaces: comparison of wet and dry systems - Proceedings of the 49th International October Conference on Mining and Metallurgy , Bor Lake, Serbien, 2017, pp. 119-123
Efficient removal of the dust from blast furnace top-gas is essential for energy recovery in a top-gas recovery turbine. In most blast furnaces de-dusting is…   mehr
  • Tagungsband
  • Energie und Umwelt

Determination of a new empirical Ms-formula suitable for Medium-Mn-steels

R. Schneider, K. Steineder, A. Watanabe, M. Okumiya, D. Krizan, C. Sommitsch - Determination of a new empirical Ms-formula suitable for Medium-Mn-steels - Proceedings of the 24th IFHTSE CONGRESS 2017 - European Conference on Heat Treatment and Surface Engineering , Nice, Frankreich, 2017, pp. 1-9
  • Tagungsband
  • Werkstoff- und Produktionstechnik

Influence of different cladding processes on microstructure and wear performance of tungsten carbide reinforced nickel-base alloys

S. Lang, R. Schneider, G. Posch, V. Jank, H. Scharner, W. Lutz, R. Kröschel - Influence of different cladding processes on microstructure and wear performance of tungsten carbide reinforced nickel-base alloys - Proceedings of the 24th IFHTSE CONGRESS 2017 - European Conference on Heat Treatment and Surface Engineering , Nice, Frankreich, 2017, pp. 1-9
  • Tagungsband
  • Werkstoff- und Produktionstechnik

On the microstructural characteristics influencing the yielding behavior of ultra-fine grained medium-Mn steels

K. Steineder, D. Krizan, R. Schneider, C. Béal, C. Sommitsch - On the microstructural characteristics influencing the yielding behavior of ultra-fine grained medium-Mn steels - ACTA MATERIALIA, 2017, pp. 39-50
  • Journal
  • Werkstoff- und Produktionstechnik

Zusammenarbeiten für eine umfassende Qualitätsoptimierung von Gebäuden

H. C. Leindecker, A. Weberberger - Zusammenarbeiten für eine umfassende Qualitätsoptimierung von Gebäuden - BauZ! Wiener Kongress für zukunftsfähiges Bauen, Wien, Österreich, 2017, pp. 78-79
Eine Qualitätsoptimierung von Gebäuden muss die Grundsätze der Lebenszyklusbetrachtung (LCA und LCC) unbedingt voraussetzen, wenn sogenannte „Nachhaltige…   mehr
  • Tagungsband
  • Energie und Umwelt

Automatisierung im Verschiebebahnhof

C. Zellner, B. Stadlmann, M. Egger, F. Michelberger, J. Zajicek - Automatisierung im Verschiebebahnhof in Jahrbuch der Logistikforschung 2017 - Trauner Verlag Linz, 2017, pp. 73-82
Der europäische Eisenbahn-Güterverkehr wird nach wie vor von der im 19. Jahrhundert entwickelten Schraubenkupplung geprägt. Diese ist für manuel-le Bedienung…   mehr
  • Buch/Buchbeitrag
  • Automatisierungstechnik und Simulationen

Three-dimensional thermographic imaging using a virtual wave concept

P. Burgholzer, M. Thor, J. Gruber, G. Mayr - Three-dimensional thermographic imaging using a virtual wave concept - JOURNAL OF APPLIED PHYSICS, Vol. 121, No. 10, 2017, pp. 11
  • Journal
  • Mess- und Prüftechnik

Super-resolution thermographic imaging using blind structured illumination

P. Burgholzer, T. Berer, J. Gruber, G. Mayr - Super-resolution thermographic imaging using blind structured illumination - Applied Physics Letters, 2017, pp. 5
  • Journal
  • Mess- und Prüftechnik

Variations in the composition of house dust by particle size

C. Lanzerstorfer - Variations in the composition of house dust by particle size - JOURNAL OF ENVIRONMENTAL SCIENCE AND HEALTH, PART A, Vol. 52, No. 8, 2017, pp. 770-777
In this study the distribution of heavy metals and other components in the various size fractions of house dust is investigated. A house dust sample collected…   mehr
  • Journal
  • Energie und Umwelt

Seite 8 von 44
FH Oberösterreich Logo