Campus HagenbergResearch Center

Publikationen

Analysis of plant materials pre-treated by steam explosion technology for their usability as insulating materials

A. Jäger, T. Schnabel, M. Huber, A. Petutschnigg - Analysis of plant materials pre-treated by steam explosion technology for their usability as insulating materials - Agronomy Research, Vol. 17, No. 1, 2019, pp. 1191-1198
Raw materials of annual plants fibres are not easily usable for industrial production applications. Pre-treatment of the annual plant fibres is necessary to…   mehr
  • Journal
  • Energie und Umwelt

Nitrogen explosive decompression pre-treatment: An alternative to

M. Raud, K. Krennhuber, A. Jäger, T. Kikas - Nitrogen explosive decompression pre-treatment: An alternative to - Energy, Vol. 177, No. 4, 2019, pp. 175-182
When using the novel N2 explosive decompression pre-treatment, its effect was investigated in relation to the biomass structure and chemical processes during…   mehr
  • Journal
  • Energie und Umwelt

Speciation of zinc and lead in the dust of a blast furnace

C. Lanzerstorfer - Speciation of zinc and lead in the dust of a blast furnace - Book of Abstracts 23rd Polish Conference of Chemical and Process Engineerin, Jachranka, Polen, 2019, pp. 78
• Distribution of Zn and Pb in various fractions in blast furnace dry dedusting residue determined • Zn is mainly present in the carbonate and oxide…   mehr
  • Tagungsband
  • Energie und Umwelt

Steelmaking dust: Speciation of zinc by sequential leaching

C. Lanzerstorfer, W. Preitschopf - Steelmaking dust: Speciation of zinc by sequential leaching - Proceedings 23rd International Conference on Environment and Mineral Processing, Ostrava, Tschechische Republik, 2019, pp. 105-108
In electric arc furnace (EAF) steelmaking significant amounts of dust are generated. The main component in the dust is usually iron. Additionally, increased…   mehr
  • Tagungsband
  • Energie und Umwelt

Stress dependence of the flowability and compressibility of building industry powders

C. Lanzerstorfer, P. Weissl - Stress dependence of the flowability and compressibility of building industry powders - Proceedings 15th Minisymposium Verfahrenstechnik, Leoben, Österreich, 2019, pp. 29-32
In this study, the stress dependence of the flowability and the bulk density of various building industry powders like cements, tile cements, plaster, hydrated…   mehr
  • Tagungsband
  • Energie und Umwelt

Tree-Based Reconfiguration Algorithm for Zonal Shipboard Power Systems

C. Neuwirt, J. D. Hallewell Haslwanter, M. Stanovich, K. Schoder, H. Ravindra, M. Steurer, C. Wong - Tree-Based Reconfiguration Algorithm for Zonal Shipboard Power Systems - Proceedings of IEEE Electric Ship Technologies Symposium (ESTS 2019), Arlington, VA, USA, Vereinigte Staaten von Amerika, 2019, pp. 8
This paper presents a novel tree-based algorithm for reconfiguring an electrical system. We specifically consider a breakerless medium-voltage direct current…   mehr
  • Tagungsband
  • Energie und Umwelt
  • Automatisierungstechnik und Simulationen

Concentration ratios of metals between house dust and road dust

C. Lanzerstorfer - Concentration ratios of metals between house dust and road dust - Proceedings of the 17th International Conference on Chemistry and the Environment, Thessaloniki, Griechenland, 2019, pp. 540-543
The transport of soil adhering to footwear and the deposition of atmospheric dust are the two main migration pathways of inorganic contaminants indoors.…   mehr
  • Tagungsband
  • Energie und Umwelt

The water content of sand required for the maximum strength for building sand castles

C. Lanzerstorfer - The water content of sand required for the maximum strength for building sand castles - CARPATHIAN JOURNAL OF EARTH AND ENVIRONMENTAL SCIENCES, Vol. 14, No. 1, 2019, pp. 61-66
A sandy beach has a special attraction for people: building sand castles. The required ingredients are simply sand and water. But what about the mixing ratio…   mehr
  • Journal
  • Energie und Umwelt

Deep-Learning-Bildverarbeitung von 3D-Laserscanner-Aufnahmen für ein Weichenstopf-Assistenzsystem

G. Zauner, T. Mueller, M. Bürger, F. Auer - Deep-Learning-Bildverarbeitung von 3D-Laserscanner-Aufnahmen für ein Weichenstopf-Assistenzsystem - ZEVrail, Vol. 143, No. 6, 2019
  • Journal
  • Automatisierungstechnik und Simulationen

Inverse Dynamics of an Industrial Robot Using Motion Constraints

T. Lauß, S. Oberpeilsteiner, K. Sherif, W. Steiner - Inverse Dynamics of an Industrial Robot Using Motion Constraints - 20th International Conference on Research and Education in Mechatronics (REM 2019), Wels, Österreich, 2019
In multibody dynamics holonomic constraint equations exist because of mechanical joints, or specified motion trajectories. In order to solve the dynamic…   mehr
  • Tagungsband
  • Automatisierungstechnik und Simulationen

Influence of the humidity on the flowability of straw combustion fly ash

M. Doppelbauer, C. Lanzerstorfer - Influence of the humidity on the flowability of straw combustion fly ash - Proceedings 15th Minisymposium Verfahrenstechnik, Leoben, Österreich, 2019, pp. 87
The flowability of a granular material is essential for the design and operation of transport equipment and storage facilities for such material. Thereby, the…   mehr
  • Tagungsband
  • Energie und Umwelt

Dynamic Volume Lines: Visual Comparison of 3D Volumes through Space-filling Curves

J. Weissenböck, B. Fröhler, E. Gröller, J. Kastner, C. Heinzl - Dynamic Volume Lines: Visual Comparison of 3D Volumes through Space-filling Curves - IEEE Transactions on Visualization and Computer Graphics (TVCG), Vol. 25, No. 1, 2019, pp. 1040-1049
  • Journal
  • Mess- und Prüftechnik

Einfluss des Umwandlungsverhaltens auf das Gefüge und die mechanischen Eigenschaften eines Q&P-Stahls mit 4,5 % Mn

S. Kaar, R. Schneider, D. Krizan, C. Béal, C. Sommitsch - Einfluss des Umwandlungsverhaltens auf das Gefüge und die mechanischen Eigenschaften eines Q&P-Stahls mit 4,5 % Mn - HTM Journal of Heat Treatment and Materials, Vol. 74, No. 2, 2019, pp. 70-83
  • Journal
  • Werkstoff- und Produktionstechnik

Estimation of Material Parameters from Pulse Phase Thermography Data

B. Stotter, K. Gresslehner, G. Mayr, G. Hendorfer, J. Sekelja - Estimation of Material Parameters from Pulse Phase Thermography Data - AIP Conference Proceedings, Baltimore, Spanien, 2019
  • Tagungsband
  • Mess- und Prüftechnik

Influence of the Quenching and Partitioning Process on the Transformation Kinetics and Hardness in a Lean Medium Manganese TRIP Steel

S. Kaar, R. Schneider, D. Krizan, C. Béal, C. Sommitsch - Influence of the Quenching and Partitioning Process on the Transformation Kinetics and Hardness in a Lean Medium Manganese TRIP Steel - Meals, Vol. 9, No. 353, 2019, pp. 13
  • Journal
  • Werkstoff- und Produktionstechnik

Comparative Investigation of the Tensile Behavior of Two Medium Mn Q&P Steels

S. Kaar, R. Schneider, D. Krizan, C. Béal, C. Sommitsch - Comparative Investigation of the Tensile Behavior of Two Medium Mn Q&P Steels - Proceedings HMnS 2019, Aachen, Österreich, 2019, pp. 37-40
  • Tagungsband
  • Werkstoff- und Produktionstechnik

Bainitic transformation during the two-step Q&P process in a lean medium Mn steel containing silicon

S. Kaar, R. Schneider, D. Krizan, C. Béal, C. Sommitsch - Bainitic transformation during the two-step Q&P process in a lean medium Mn steel containing silicon - Proceedings ECHT 2019, Bardolino, Italien, 2019, pp. 10
  • Tagungsband
  • Werkstoff- und Produktionstechnik

The upper size limit of the dust samples in road dust studies: benefits of a combined sieving and air classification sample preparation procedure

C. Lanzerstorfer, A. Logiewa - The upper size limit of the dust samples in road dust studies: benefits of a combined sieving and air classification sample preparation procedure - ENVIRONMENTAL POLLUTION, Vol. 245, No. 1, 2019, pp. 1079-1085
The concentrations of heavy metals and other components in road dust from a Polish coal mining district were investigated. The sample was split into eight size…   mehr
  • Journal
  • Energie und Umwelt

Emissions and removal of gaseous pollutants from the top-gas of a blast furnace

C. Lanzerstorfer, W. Preitschopf, R. Neuhold, C. Feilmayr - Emissions and removal of gaseous pollutants from the top-gas of a blast furnace - ISIJ INTERNATIONAL, Vol. 59, No. 3, 2019, pp. 590-595
The emissions of a blast furnace and the separation efficiency of the top-gas scrubber were investigated for the gaseous components HCl, H2S, SO2, COS, CS2,…   mehr
  • Journal
  • Energie und Umwelt

The Influence of Air-dispersed Essential Oils from Lemon (Citrus limon) and Silver fir (Abies alba) on Airborne Bacteria and Fungi in Hospital Rooms

A. Lanzerstorfer, M. Hackl, M. Schlömer, B. Rest, E. Deutsch-Grasl, C. Lanzerstorfer - The Influence of Air-dispersed Essential Oils from Lemon (Citrus limon) and Silver fir (Abies alba) on Airborne Bacteria and Fungi in Hospital Rooms - JOURNAL OF ENVIRONMENTAL SCIENCE AND HEALTH, PART A, Vol. 54, No. 3, 2019, pp. 256-260
Airborne bacteria and fungi are an ongoing problem in hospitals. Because of the antimicrobial activities of essential oils (EOs) dispersion of EOs into the air…   mehr
  • Journal
  • Energie und Umwelt

Ecodesign Methods for Mechatronic Systems: A Literature Review and Classification

S. Merschak, P. Hehenberger - Ecodesign Methods for Mechatronic Systems: A Literature Review and Classification - 20th International Conference on Research and Education in Mechatronics (REM 2019), Wels, Österreich, 2019
  • Tagungsband
  • Energie und Umwelt

Seite 1 von 44
FH Oberösterreich Logo