Campus WelsResearch Center

Mess- und Prüftechnik Research Center Wels

Publikationen

ALTERNATIVE METHODS FOR DETERMINING MICROCLEANLINESS: A STUDY BASED ON HOT WORK TOOL STEELS

W. Schützenhöfer, C. Decker, B. Plank, E. Plesiutschnig - ALTERNATIVE METHODS FOR DETERMINING MICROCLEANLINESS: A STUDY BASED ON HOT WORK TOOL STEELS - IFM 2017 – 20th International Forgemasters Meeting 2017, Graz, Österreich, 2017, pp. 10
This study focuses on the development and comparison of standard and alternative methods to evaluate the cleanliness of hot work tool steels used for dies on a...   mehr
  • Tagungsband
  • Mess- und Prüftechnik
  • Werkstoff- und Produktionstechnik

4D Röntgen-Computertomografie mittels konventioneller Labor CTs: Möglichkeiten und Einschränkungen

B. Plank, D. Salaberger, G. Rao, A. Amirkhanov, J. Kastner - 4D Röntgen-Computertomografie mittels konventioneller Labor CTs: Möglichkeiten und Einschränkungen - DGZfP-Jahrestagung 2017, Koblenz, Deutschland, 2017, pp. 9
In Bauteile zu schauen um die innere Geometrie sowie Struktur dreidimensional zu charakterisieren ist mittlerweile ein Standardanwendungsgebiet der...   mehr
  • Tagungsband
  • Mess- und Prüftechnik
  • Werkstoff- und Produktionstechnik

Computation of permeability of a non-crimp carbon textile reinforcement based on X-ray computed tomography images

I. Straumit, C. Hahn, E. Winterstein, B. Plank, S. Lomov, M. Wevers - Computation of permeability of a non-crimp carbon textile reinforcement based on X-ray computed tomography images - COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, Vol. 81, No. 1, 2016, pp. 289-295
The paper demonstrates the possibility of a correct (within the experimental scatter) calculation of a textile reinforcement permeability based on X-ray...   mehr
  • Journal
  • Mess- und Prüftechnik
  • Werkstoff- und Produktionstechnik

Evaluation of relationships between particle orientation and thermal conductivity in bark insulation board by means of CT and discrete modeling

G. Kain, B. Lienbacher, M. Barbu, B. Plank, K. Richter, A. Petutschnigg - Evaluation of relationships between particle orientation and thermal conductivity in bark insulation board by means of CT and discrete modeling - Case Studies in Nondestructive Testing and Evaluation, Vol. 6, No. 2, 2016, pp. 21-29
Insulation boards made out of larch bark were pressed and scanned with an industrial X-ray computed tomograph (CT) in order to study the structure of the...   mehr
  • Journal
  • Mess- und Prüftechnik

3D analysis of macrosegregation in twin-roll cast AA3003 alloy

M. Šlapáková, M. Zimina, S. Zaunschirm, J. Kastner, J. Bajer, M. Cieslar - 3D analysis of macrosegregation in twin-roll cast AA3003 alloy - MATERIALS CHARACTERIZATION, Vol. 118, No. 118, 2016, pp. 44-49
  • Journal
  • Mess- und Prüftechnik

EVALUATION OF ALTERNATIVE MICROCLEANLINESS METHODS

W. Schützenhöfer, C. Decker, B. Plank, E. Plesiutschnig - EVALUATION OF ALTERNATIVE MICROCLEANLINESS METHODS - Proceedings of 10th International TOOL Conference (TOOL 2016), Bratislava, Slowakei, 2016, pp. 10
This study focuses on the development and comparison of standard- and alternative methods to evaluate the Micro-cleanliness of tool steels on a microscopic...   mehr
  • Tagungsband
  • Mess- und Prüftechnik
  • Werkstoff- und Produktionstechnik

FAILURE DETECTION IN COMMERCIAL THERMOELECTRIC MODULES USING INFRARED THERMOGRAPHY

S. Breitwieser, K. Greßlehner, B. Plank, G. Hendorfer - FAILURE DETECTION IN COMMERCIAL THERMOELECTRIC MODULES USING INFRARED THERMOGRAPHY - Proceedings of 6th World Sustainable Energy Forum (WSEF2016), Vienna, Österreich, 2016, pp. 9
This work presents the possibility of using infrared (IR) thermography as a fast, contactless and therefore nondestructive inspection method to detect failures...   mehr
  • Tagungsband
  • Mess- und Prüftechnik

A Study of Uncertainties from Workpiece Tilt in Dimensional Computed Tomography

H. Villarraga-Gómez, A. Amirkhanov, S. Smith - A Study of Uncertainties from Workpiece Tilt in Dimensional Computed Tomography - Proceedings 31st ASPE Annual Meeting, Portland/OR, USA, Vereinigte Staaten von Amerika, 2016, pp. 365-371
  • Tagungsband
  • Mess- und Prüftechnik

A reassessment of the presumed Torrener Bärenhöhle's Paleolithic human tooth

C. Margherita , T. Sahra , K. Wiltschke-Schrotta, S. Senck, G. Oxilia, R. Sorrentino, G. Mancuso, G. Gruppioni, R. Lindner, J. Hublin, S. Benazzi - A reassessment of the presumed Torrener Bärenhöhle's Paleolithic human tooth - JOURNAL OF HUMAN EVOLUTION, Vol. 93, No. 1, 2016, pp. 120-125
  • Journal
  • Mess- und Prüftechnik

In-Situ Observation of Bubble Formation in Neat Resin during the Curing Process by Means of X-Ray Computed Tomography

B. Plank, R. Helmus, M. Gschwandtner, R. Hinterhölzl, J. Kastner - In-Situ Observation of Bubble Formation in Neat Resin during the Curing Process by Means of X-Ray Computed Tomography - 19th World Conference on Non-Destructive Testing, WCNDT 2016 , München, Deutschland, 2016, pp. 1-8
Because of their outstanding specific strength carbon fibre-reinforced polymers (CFRP) are the favourite material for many lightweight applications, especially...   mehr
  • Tagungsband
  • Mess- und Prüftechnik
  • Werkstoff- und Produktionstechnik

Tree bark insulation panels for special purpose insulation: evaluation and discrete modeling of structure property relationships

G. Kain, B. Lienbacher, M. Barbu, B. Plank, K. Richter, A. Petutschnigg - Tree bark insulation panels for special purpose insulation: evaluation and discrete modeling of structure property relationships - Proceedings of World Conference on Timber Engineering, Vienna, Austria, Österreich, 2016, pp. 8
Tree bark is a highly efficient natural tree protective layer with outstanding properties. It is a classic by-product of the wood industries and most of the...   mehr
  • Tagungsband
  • Mess- und Prüftechnik

Comparison of predicted and measured fiber orientations in injection molded parts

G. Gsellmann, M. Jerabek, D. Salaberger - Comparison of predicted and measured fiber orientations in injection molded parts - 6th Conference on Industrial Computed Tomography, Wels, Österreich, 2016
  • Tagungsband
  • Mess- und Prüftechnik
  • Werkstoff- und Produktionstechnik

SINGLE FIBRE CHARACTERISATION OF CURVED FIBRES WITHIN A THERMOPLASTIC MATRIX USING X-RAY TOMOGRAPHY

D. Salaberger, M. Jerabek, C. Hannesschläger, J. Kastner - SINGLE FIBRE CHARACTERISATION OF CURVED FIBRES WITHIN A THERMOPLASTIC MATRIX USING X-RAY TOMOGRAPHY - ECCM17 - 17th European Conference on Composite Materials, Munich, Deutschland, 2016
  • Tagungsband
  • Mess- und Prüftechnik
  • Werkstoff- und Produktionstechnik

GEMSe: Visualization-Guided Exploration of Multi-channel Segmentation Algorithms

B. Fröhler, T. Möller, C. Heinzl - GEMSe: Visualization-Guided Exploration of Multi-channel Segmentation Algorithms - COMPUTER GRAPHICS FORUM, Vol. 35, No. 5, 2016, pp. 191-200
  • Journal
  • Mess- und Prüftechnik

Zuverlässigkeitsstudie der Aktiven Thermografie bei der Prüfung von Verbundwerkstoffen mittels Probability of Detection Analyse

J. Gruber, K. Greßlehner, J. Sekelja, G. Mayr - Zuverlässigkeitsstudie der Aktiven Thermografie bei der Prüfung von Verbundwerkstoffen mittels Probability of Detection Analyse - Tagungsband Thermographie-Kolloquium 2015, Leinfelden-Echterdingen, Germany, Deutschland, 2015, pp. 10
Die Aktive Thermografie findet eine immer größere Anwendung bei der zerstörungsfreien Prüfung von Luftfahrtkomponenten. Ziel dieser Arbeit ist es, das...   mehr
  • Tagungsband
  • Mess- und Prüftechnik

Quantitative Bestimmung der Porosität in kohlefaserverstärkte Polymerverbundwerkstoffe mittels Pulsthermographie

G. Mayr, G. Hendorfer, J. Sekelja, B. Plank - Quantitative Bestimmung der Porosität in kohlefaserverstärkte Polymerverbundwerkstoffe mittels Pulsthermographie - Tagungsband des Thermographie-Kolloquium, Leinfelden-Echterdingen, Germany, Deutschland, 2015
  • Tagungsband
  • Mess- und Prüftechnik

Integrated Imaging and Vision Techniques for Industrial Inspection

Z. Liu, H. Ukida, P. Ramuhalli, K. Niel - Integrated Imaging and Vision Techniques for Industrial Inspection - Springer, 2015, pp. 541
This pioneering text/reference presents a detailed focus on the use of machine vision techniques in industrial inspection applications. An internationally...   mehr
  • Buch/Buchbeitrag
  • Mess- und Prüftechnik
  • Informations und Kommunikationssysteme
  • Automatisierungstechnik und Simulationen

Industrial Inpsection with Open Eyes: Advance with Machine Vision Technology

Z. Liu, H. Ukida, K. Niel, P. Ramuhalli - Industrial Inpsection with Open Eyes: Advance with Machine Vision Technology in Integrated Imaging and Vision Techniques for Industrial Inspection (Contributions to Book: Part/Chapter/Section 1), (Editors: Z.Liu, H. Ukida, P. Ramuhalli, K. Niel) - Springer, 2015, pp. 1-37
Machine vision systems have evolved significantly with the technology advances to tackle the challenges from modern manufacturing industry. A wide range of...   mehr
  • Buch/Buchbeitrag
  • Mess- und Prüftechnik
  • Informations und Kommunikationssysteme
  • Automatisierungstechnik und Simulationen

X-ray computed tomography for non-destructive testing and materials characterization

J. Kastner, C. Heinzl - X-ray computed tomography for non-destructive testing and materials characterization in Integrated Imaging and Vision Techniques for Industrial Inspection (Editors: Z.Liu, H. Ukida, P. Ramuhalli, K. Niel) - Springer, 2015
  • Buch/Buchbeitrag
  • Mess- und Prüftechnik

Multimodal Registration and Fusion of Industrial CT Data

H. Zauner, J. Kastner, C. Heinzl - Multimodal Registration and Fusion of Industrial CT Data - Proceedings: Digital Industrial Radiology and Computed Tomography (DIR 2015), Ghent, Belgien, 2015
  • Tagungsband
  • Mess- und Prüftechnik

3D image processing for single fibre characterization by means of XCT

H. Zauner, J. Kastner, D. Salaberger, C. Heinzl - 3D image processing for single fibre characterization by means of XCT - Acta Stereologica, Vol. 1, No. 1, 2015
  • Journal
  • Mess- und Prüftechnik

Seite 1 von 11
FH Oberösterreich Logo