Campus WelsResearch Center

Publikationen

Grate-fired biomass combustion plants using forest residues as fuel: Enrichment factors for components in the fly ash

C. Lanzerstorfer - Grate-fired biomass combustion plants using forest residues as fuel: Enrichment factors for components in the fly ash - WASTE AND BIOMASS VALORIZATION, Vol. 8, No. 1, 2017, pp. 235-240
The aim of this work is to investigate the enrichment factors for various nutrients and heavy metals in the fly ash from grate-fired combustion plants using...   mehr
  • Journal
  • Energie und Umwelt

Air Classification of Dust from Steel Converter Secondary De-dusting for Zinc Enrichment

C. Lanzerstorfer - Air Classification of Dust from Steel Converter Secondary De-dusting for Zinc Enrichment - Proceedings 19th International Conference on Environmental and Chemical Engineering, Innsbruck, Österreich, 2017, pp. 2345-2352
The off-gas from the basic oxygen furnace (BOF), where pig iron is converted into steel, is treated in the primary ventilation system. This system is in full...   mehr
  • Tagungsband
  • Energie und Umwelt

ALTERNATIVE METHODS FOR DETERMINING MICROCLEANLINESS: A STUDY BASED ON HOT WORK TOOL STEELS

W. Schützenhöfer, C. Decker, B. Plank, E. Plesiutschnig - ALTERNATIVE METHODS FOR DETERMINING MICROCLEANLINESS: A STUDY BASED ON HOT WORK TOOL STEELS - IFM 2017 – 20th International Forgemasters Meeting 2017, Graz, Österreich, 2017, pp. 10
This study focuses on the development and comparison of standard and alternative methods to evaluate the cleanliness of hot work tool steels used for dies on a...   mehr
  • Tagungsband
  • Mess- und Prüftechnik
  • Werkstoff- und Produktionstechnik

4D Röntgen-Computertomografie mittels konventioneller Labor CTs: Möglichkeiten und Einschränkungen

B. Plank, D. Salaberger, G. Rao, A. Amirkhanov, J. Kastner - 4D Röntgen-Computertomografie mittels konventioneller Labor CTs: Möglichkeiten und Einschränkungen - DGZfP-Jahrestagung 2017, Koblenz, Deutschland, 2017, pp. 9
In Bauteile zu schauen um die innere Geometrie sowie Struktur dreidimensional zu charakterisieren ist mittlerweile ein Standardanwendungsgebiet der...   mehr
  • Tagungsband
  • Mess- und Prüftechnik
  • Werkstoff- und Produktionstechnik

Determination of a new empirical Ms-formula suitable for Medium-Mn-steels

R. Schneider, K. Steineder, A. Watanabe, M. Okumiya, D. Krizan, C. Sommitsch - Determination of a new empirical Ms-formula suitable for Medium-Mn-steels - Proceedings of the 24th IFHTSE CONGRESS 2017 - European Conference on Heat Treatment and Surface Engineering , Nice, Frankreich, 2017, pp. 1-9
  • Tagungsband
  • Werkstoff- und Produktionstechnik

Influence of different cladding processes on microstructure and wear performance of tungsten carbide reinforced nickel-base alloys

S. Lang, R. Schneider, G. Posch, V. Jank, H. Scharner, W. Lutz, R. Kröschel - Influence of different cladding processes on microstructure and wear performance of tungsten carbide reinforced nickel-base alloys - Proceedings of the 24th IFHTSE CONGRESS 2017 - European Conference on Heat Treatment and Surface Engineering , Nice, Frankreich, 2017, pp. 1-9
  • Tagungsband
  • Werkstoff- und Produktionstechnik

On the microstructural characteristics influencing the yielding behavior of ultra-fine grained medium-Mn steels

K. Steineder, D. Krizan, R. Schneider, C. Béal, C. Sommitsch - On the microstructural characteristics influencing the yielding behavior of ultra-fine grained medium-Mn steels - ACTA MATERIALIA, 2017, pp. 39-50
  • Journal
  • Werkstoff- und Produktionstechnik

Zusammenarbeiten für eine umfassende Qualitätsoptimierung von Gebäuden

H. C. Leindecker, A. Weberberger - Zusammenarbeiten für eine umfassende Qualitätsoptimierung von Gebäuden - BauZ! Wiener Kongress für zukunftsfähiges Bauen, Wien, Österreich, 2017, pp. 78-79
Eine Qualitätsoptimierung von Gebäuden muss die Grundsätze der Lebenszyklusbetrachtung (LCA und LCC) unbedingt voraussetzen, wenn sogenannte „Nachhaltige...   mehr
  • Tagungsband
  • Energie und Umwelt

Variations in the composition of house dust by particle size

C. Lanzerstorfer - Variations in the composition of house dust by particle size - JOURNAL OF ENVIRONMENTAL SCIENCE AND HEALTH, PART A, Vol. 52, No. 8, 2017, pp. 770-777
In this study the distribution of heavy metals and other components in the various size fractions of house dust is investigated. A house dust sample collected...   mehr
  • Journal
  • Energie und Umwelt

Non-destructive testing procedure for porosity determination in carbon fibre reinforced plastics using pulsed thermography

G. Mayr, K. Greßlehner, G. Hendorfer - Non-destructive testing procedure for porosity determination in carbon fibre reinforced plastics using pulsed thermography - Quantitative InfraRed Thermography Journal, Vol. 14, No. 2, 2017, pp. 263-274
The aim of this work was to develop a procedure for the application of pulsed thermography as a quantitative method for porosity determination in carbon fibre...   mehr
  • Journal
  • Mess- und Prüftechnik

Three-dimensional characterization of polymer foams using X-ray dark-field imaging

S. Senck, B. Plank, C. Gusenbauer, D. Salaberger, W. Santer, J. Kastner - Three-dimensional characterization of polymer foams using X-ray dark-field imaging - Proceedings Industrial Computed Tomography (iCT2017), Leuven, Belgien, 2017, pp. 1-7
  • Tagungsband
  • Mess- und Prüftechnik

SATLOC - An innovative train control system for low traffic-density lines

T. Gradinariu, B. Stadlmann - SATLOC - An innovative train control system for low traffic-density lines - IRSE News, Vol. 2017, No. 2, 2017, pp. 17-23
SATLOC ist ein GNSS baisertes Zugsicherungssystem für Strecken geringerer Verkehrsdichte. Der Artikel stellt das System mit seinen Eigenschaften vor und...   mehr
  • Journal
  • Automatisierungstechnik und Simulationen

The discrete adjoint method for parameter identification in multibody system dynamics

T. Lauß, S. Oberpeilsteiner, W. Steiner, K. Nachbagauer - The discrete adjoint method for parameter identification in multibody system dynamics - Multibody System Dynamics, Vol. 1, No. 1, 2017, pp. 1-14
The adjoint method is an elegant approach for the computation of the gradient of a cost function to identify a set of parameters. An additional set of...   mehr
  • Journal
  • Automatisierungstechnik und Simulationen

Condition Monitoring for Twin-Fluid Nozzles with Internal Mixing

C. Lanzerstorfer - Condition Monitoring for Twin-Fluid Nozzles with Internal Mixing - Proceedings 19th International Conference on Chemical and Environmental Engineering, London, Vereinigtes Königreich von Großbritannien und Nordirland, 2017, pp. 1226-1229
Liquid sprays of water are frequently used in air pollution control for gas cooling purposes and for gas cleaning. Twin-fluid nozzles with internal mixing are...   mehr
  • Tagungsband
  • Energie und Umwelt

Influence of the moisture content on the flowability of fine-grained iron ore concentrate

C. Lanzerstorfer, M. Hinterberger - Influence of the moisture content on the flowability of fine-grained iron ore concentrate - Proceedings of the 19th International Conference on Chemical and Environmental Engineering, London, Vereinigtes Königreich von Großbritannien und Nordirland, 2017, pp. 1230-1233
The iron content of the ore used is crucial for the productivity and coke consumption rate in blast furnace pig iron production. Therefore, most iron ore...   mehr
  • Tagungsband
  • Energie und Umwelt

A Frequency Domain Approach for Parameter Identification in Multibody Dynamics

S. Oberpeilsteiner, T. Lauß, W. Steiner, K. Nachbagauer - A Frequency Domain Approach for Parameter Identification in Multibody Dynamics - Multibody System Dynamics, 2017, pp. 1-18
The adjoint method shows an efficient way to incorporate inverse dynamics to engineering multibody applications, as e.g. parameter identification. In case of...   mehr
  • Journal
  • Automatisierungstechnik und Simulationen

User surveys for construction ecology and building optimization

H. C. Leindecker - User surveys for construction ecology and building optimization - WSED 2017 Proceedings, Wels, Österreich, 2017, pp. 1
  • Tagungsband
  • Energie und Umwelt

Potential of air classification for zinc management in dust recycling in ironmaking

C. Lanzerstorfer - Potential of air classification for zinc management in dust recycling in ironmaking - ISIJ INTERNATIONAL, Vol. 57, No. 8, 2017, pp. 1484-1489
The dusts generated in the blast furnace process are partly recycled via the sinter plant. The amount of Zn which is recycled with these dusts is limited to...   mehr
  • Journal
  • Energie und Umwelt

Gesunde Gebäude mit klimaaktiv Deklaration

H. C. Leindecker - Gesunde Gebäude mit klimaaktiv Deklaration - Tagungsband FFH 2017, Krems, Österreich, 2017, pp. 447-453
Da sich die meisten Menschen über 90% der Zeit in Gebäuden aufhalten, kommt der Qualität der Innenraumluft Gesundheit der Menschen eine enorme Bedeutung zu....   mehr
  • Tagungsband
  • Energie und Umwelt
  • Leben im Alter

Creating Competitive Advantage from Service

C. Rau, A. Zbiek, J. Jonas - Creating Competitive Advantage from Service - Research-Technology Management, Vol. 60, No. 3, 2017, pp. 48-56
In commodities markets, companies struggle to develop and communicate solutions for customer needs that provide competitive advantage. Service design thinking...   mehr
  • Journal
  • Innovations- und Technologiemanagement

Characterization of dust from blast furnace cast house de-dusting

C. Lanzerstorfer - Characterization of dust from blast furnace cast house de-dusting - ENVIRONMENTAL TECHNOLOGY, Vol. 38, No. 19, 2017, pp. 2440-2446
During casting of liquid iron and slag a considerable amount of dust is emitted into the cast house of a blast furnace. Usually, this dust is extracted via...   mehr
  • Journal
  • Energie und Umwelt

Seite 1 von 36
FH Oberösterreich Logo